Eclipse PA5532 ?

Home / the12volt's Install Bay / Car Audio / Eclipse PA5532 ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Steven6095

Copper - Posts: 74

Joined: April 05, 2005

Location: United States

Posted: April 25, 2005 at 9:14 AM / IP Logged

Hi. I went this weekend to buy an Eclipse PA5532 but something concerned me.

My headunit (Alpine) has front, rear and subwoofer RCAs. (three sets of preouts)

The AMP only has two RCA inputs?

How does this work?

Steven

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: April 25, 2005 at 11:06 AM / IP Logged

Thats because the amp isint 6 channels. What are you going to use the amp to run. BTW this is completly normal, ot a concern at all.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

svc

Member - Posts: 1

Joined: March 05, 2005

Location: Uzbekistan

Posted: April 25, 2005 at 11:08 AM / IP Logged

Steven

I have this exact amp in my car on an Alpine radio with 3 pre-outs. There is a mono sub input on the amp directly under the output rca. You will need an rca Y-adapter 2 female to 1 male.You will have complete sub control from your deck. Hope this helps.

Tim

Back to Top

Steven6095

Copper - Posts: 74

Joined: April 05, 2005

Location: United States

Posted: April 25, 2005 at 11:31 AM / IP Logged

MB Quart Components with the Add A Woofer system

so 2 ohm load on each front channel.

Set of MB Quart COaxials for rear fill

DVC Eclipse sub ( 4 x 4)

Back to Top

Steven6095

Copper - Posts: 74

Joined: April 05, 2005

Location: United States

Posted: April 25, 2005 at 11:32 AM / IP Logged

I am looking at a picture of both ends of the AMP and I do not see a mono input...

Back to Top

Steven6095

Copper - Posts: 74

Joined: April 05, 2005

Location: United States

Posted: April 25, 2005 at 11:34 AM / IP Logged

I understand whatyou mean by not being a six channel.

Front L + R = 2 channels

Rear L + R = 2 channels

One "sub" = 1 channel

I will stop by today and look at it again to make sure of the inputs.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Eclipse PA5532 ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.