spacer spacer spacer spacer

94 j30 infiniti remote start

Post ReplyPost New Topic
< Prev Topic Next Topic >
Copper - Posts: 94
Copper spacespace
Joined: December 06, 2004
Location: United States
Posted: June 05, 2005 at 11:23 AM / IP Logged  

doing a 94 j30 remote start using scytek remote start and dei tec info

I got eveything powered up that its says on the paper but when i try to crank it just ingage the starter until i turn the key on

I checked for other wires that may need to be powered up no luck.

Copper - Posts: 210
Copper spacespace
Joined: June 13, 2002
Location: United States
Posted: June 05, 2005 at 2:38 PM / IP Logged  
I did my 93 J30 last year
Two ignition wires to be powered on Ign1 WHITE/ black and Ign2 BLACK/ red.
Did you check the scytek to make sure all outputs are working ? It could be a program only option. Recheck your wiring connections. If you have a starter disable relay installed, check that.. Everything should be pretty forward. Tight car to work on, but, not impossible..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, July 19, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer