94 j30 infiniti remote start

Home / the12volt's Install Bay / Car Security and Convenience / 94 j30 infiniti remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ksutton

Copper - Posts: 94

Joined: December 06, 2004

Location: United States

Posted: June 05, 2005 at 11:23 AM / IP Logged

doing a 94 j30 remote start using scytek remote start and dei tec info

I got eveything powered up that its says on the paper but when i try to crank it just ingage the starter until i turn the key on

I checked for other wires that may need to be powered up no luck.

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: June 05, 2005 at 2:38 PM / IP Logged

I did my 93 J30 last year

Two ignition wires to be powered on Ign1 WHITE/ black and Ign2 BLACK/ red.

Did you check the scytek to make sure all outputs are working ? It could be a program only option. Recheck your wiring connections. If you have a starter disable relay installed, check that.. Everything should be pretty forward. Tight car to work on, but, not impossible..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 j30 infiniti remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.