the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

mold release


Post ReplyPost New Topic
< Prev Topic Next Topic >
Poormanq45 
Silver - Posts: 597
Silver spacespace
Joined: October 27, 2004
Location: United States
Posted: July 07, 2005 at 11:22 AM / IP Logged  
You said you cut up the mold? Why don't you just put it back together?
Also, wax, wax, wax... THEN a coating of pam/crisco.
rhdAndy 
Copper - Posts: 65
Copper spacespace
Joined: August 02, 2004
Location: United States
Posted: July 10, 2005 at 12:48 PM / IP Logged  

no i cut up the box inside the mold, well i guess that is the mold, about termonolgy im not god at... i made a molf oof the box i want to duplicate, the modle box i didnt put time into it tool me all of like 3 hours muinuds the curing time and then i took a mold of it.. i need to make two and i thought i can make em identical if i made a mold fist....< =text/>

Steven Kephart 
Platinum - Posts: 1,737
Platinum spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: November 06, 2003
Location: Oregon, United States
Posted: July 11, 2005 at 12:08 AM / IP Logged  

Man, you guys make a mess when you fiberglass. mold release - Page 2 - Last Post -- posted image.  Some projects you don't need a mold release with.  However if you need one, my favorite stuff for the job is PVA (poly-vinyl alcohol).  If you spray it on, it provides a fully covered layer that is super thin allowing for a perfect mold, is water soluable, and peels off like a thin layer of plastic.  And also, it won't leave a mess when you are done.  Here's a link: http://www.uscomposites.com/moldrelease.html 

Steven Kephart

Adire Audio

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, September 25, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer