the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Window Roll up / down questions


Post ReplyPost New Topic
< Prev Topic Next Topic >
TJ92Civic 
Copper - Posts: 161
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: August 01, 2005 at 12:12 AM / IP Logged  

Hi,

I want to install window roll up / down in my car (1996 Volvo 850).  I have a Compustar 2W900FM-AS, and I want it to roll up the windows when I push the first aux button, and roll down when I push the other aux button.  It is a 4 door, what modules would be best to use to do this?  and how many will I need?  And any other info would be great!

thanks

tim

xtremeaudio 
Copper - Posts: 174
Copper spacespace
Joined: August 30, 2004
Location: United States
Posted: August 01, 2005 at 3:28 AM / IP Logged  
dei 530t is good you can use roll up and down for 2 window or 4 window roll or down
TJ92Civic 
Copper - Posts: 161
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: August 01, 2005 at 10:07 AM / IP Logged  

So I should get two of them?  One for the front windowns and one for the back.  And I can wire it to the aux outputs on the alarm?

tim

Velocity Motors 
Moderator - Posts: 12,487
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 01, 2005 at 11:41 AM / IP Logged  

Get two of these or get one module to do all 4 up & down. They're epensive, but worth the hassle in the installation portion. You will need to program the AUX channels for continuous or if you want to have the ability to vent the windows you can have the channels programmed for latched.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
TJ92Civic 
Copper - Posts: 161
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: August 01, 2005 at 12:01 PM / IP Logged  

Thanks.  Do you know of a module that does 4 windows up and down?  And When I set it to latch, I can program the time from 1-99 sec, but it doesn't say how to program the time.

tim

Velocity Motors 
Moderator - Posts: 12,487
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 01, 2005 at 12:08 PM / IP Logged  
I'm not at the shop right now for my pricing book but I'll look one up for you . As far as the programming you have to time how long it take for the windows to go up and add about 2 seconds to that to ensure that all windows will be up. The internal voltage sensing will automatically cut out the power to the modules anyways, but having the latch output too long is better than not long enough.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
minitruckin_jay 
Member - Posts: 9
Member spacespace
Joined: December 02, 2004
Location: Ontario, Canada
Posted: August 02, 2005 at 11:43 PM / IP Logged  
i know i have seen autoloc makes one, or just start puttin relays on, did it on my buddys 1991 integra, 3 years later still works
TJ92Civic 
Copper - Posts: 161
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: August 03, 2005 at 10:39 PM / IP Logged  

Have you found the module yet?

thanks

tim


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 17, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer