headrest and visor monitors

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / headrest and visor monitors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

loonytu

Member - Posts: 13

Joined: May 01, 2004

Location: Canada

Posted: August 01, 2005 at 10:48 PM / IP Logged

wondering how to hookup two headrest monitors and one visor monitor together on one video output i am using a drop down monitor in the roof i already have the visor hooked up to the roof monitor. Can i use a y cable to hook up the two headrests together with the visor

Back to Top

dxav

Silver - Posts: 314

Joined: September 11, 2002

Location: United States

Posted: August 02, 2005 at 9:30 PM / IP Logged

You can use an Y adapter. Try to get 75 Ohm video cable, too. Your best bet is to buy a $25 video amplifier (nothing fancy, they are all basically the same). Put the video output of the source into the input of the video amplifier, and then drive up to 4 displays cleanly. This should do the trick.

Good Luck!

Back to Top

loonytu

Member - Posts: 13

Joined: May 01, 2004

Location: Canada

Posted: August 02, 2005 at 10:51 PM / IP Logged

thxs for your help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

headrest and visor monitors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.