Viper 791 Problem

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791 Problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Geoff897

Member - Posts: 3

Joined: August 14, 2005

Location: Australia

Posted: August 14, 2005 at 5:59 AM / IP Logged

Hi all i just got my alarm installed the other day it was working fine

i pulled the stereo out and now i have the led on constantly

when i lock the car the doors lock but the windows dont go up.

when i start the car the light goes out and none of the sensors work

Any ideas on the problem??

Thank you

Geoff

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: August 14, 2005 at 9:38 AM / IP Logged

sounds like in valet mode. form remote: open a door, hit lock then unlock and lock again. the led will go out.

Back to Top

Geoff897

Member - Posts: 3

Joined: August 14, 2005

Location: Australia

Posted: August 14, 2005 at 3:56 PM / IP Logged

Thanks ill give that a go

Also 1 of my back windows doesnt close all the way up i needed to lock and unlock the car to get it to close all the way up any ideas.

Its in a Subaru liberty 01

Back to Top

Geoff897

Member - Posts: 3

Joined: August 14, 2005

Location: Australia

Posted: August 17, 2005 at 6:31 AM / IP Logged

Hi thanks swamprat323 thats what the poblem was

Back to Top

topspoiler

Member - Posts: 29

Joined: July 26, 2005

Location: United States

Posted: August 22, 2005 at 4:05 AM / IP Logged

I think you have to change the resistant on the window module.

Back to Top

topspoiler

Member - Posts: 29

Joined: July 26, 2005

Location: United States

Posted: August 22, 2005 at 4:06 AM / IP Logged

I think you have to change the resistant on the window module.

Back to Top

tillithz

Member - Posts: 48

Joined: July 06, 2005

Location: United States

Posted: August 22, 2005 at 11:24 AM / IP Logged

well if its just ONE window on the two window module i would think that instead of the resistance being raised you should figure out what is dragging that one window. such as maybe an accident or moisture, or something physical inside the door causing the window not to roll up properly

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 791 Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.