the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 corvette remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jerry79 
Member - Posts: 7
Member spacespace
Joined: August 11, 2005
Posted: August 18, 2005 at 2:52 AM / IP Logged  

I just got done installing a remote start on my 2000 corvette.  Everything else work fine, but when i try to start the car it starts for about a second or less then shuts off. What could it be, i was told it's probably the key bypass. I thought if that didn't work the car won't be crank. Is there any way to test if the keypass is working propertly

Thank You

soundmasta 
Silver - Posts: 246
Silver spacespace
Joined: November 17, 2004
Location: United States
Posted: August 18, 2005 at 7:57 AM / IP Logged  
un hook it and take the car to a professional.
Hornshockey 
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: August 18, 2005 at 9:50 AM / IP Logged  
you can always put the key in the the cylinder(do not turn it)  and try the remote start; if it starts and stays running, then there's a problem with your bypass.  If you still have the problem, you've got some more diagnosis to do.
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
BoominRolla 
Copper - Posts: 198
Copper spacespace
Joined: September 06, 2004
Location: United States
Posted: August 18, 2005 at 11:33 AM / IP Logged  
i'm guessing a passlock 2 bypass?... maybe corvettes are pk3? it depends? I've never tried to install a starter on a corvette because nobody in my area drives them in the winter plus most are standards and most everyone has heard from a friends buddies brothers cousins uncle who worked at a shop a few years back that putting a starter in a standard is impossible... Which is 100% wrong... but people don't know until they ask the professionals
mxxmikexx 
Silver - Posts: 796
Silver spacespace
Joined: September 18, 2002
Location: United States
Posted: August 18, 2005 at 5:22 PM / IP Logged  
DEI says the vette has VATS
i would try Hornshockey's advice and stick the key in and try remote starting it
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
OhioMike1101 
Silver - Posts: 343
Silver spacespace
Joined: August 22, 2004
Location: United States
Posted: August 18, 2005 at 6:56 PM / IP Logged  
2000 vette is a PIA, I remember doing one and hitting the tach in the passenger tire well at the ECM. Everything else was in the passenger floor. Not hard, but that tach was a PIA.
Why would a rookie mess with a Vette? If u have a 00 Vette, shouldn't you (wouldn't you) want a pro to do it?
soundmasta 
Silver - Posts: 246
Silver spacespace
Joined: November 17, 2004
Location: United States
Posted: August 19, 2005 at 7:52 AM / IP Logged  
....professional....
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 19, 2005 at 8:14 AM / IP Logged  
Jerry79 wrote:

I just got done installing a remote start on my 2000 corvette.  Everything else work fine, but when i try to start the car it starts for about a second or less then shuts off. What could it be, i was told it's probably the key bypass. I thought if that didn't work the car won't be crank. Is there any way to test if the keypass is working propertly

Thank You

You will need to install a bypass module in order for the remote start to work.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Jerry79 
Member - Posts: 7
Member spacespace
Joined: August 11, 2005
Posted: August 21, 2005 at 4:03 PM / IP Logged  
This is my very fist install. I installed clifford Intellistat IV on my 2000 vette.  When I hit the * on the remote, the car turns over and even starts lot of times but only stays on for about a second then shuts off.  I have connected the RPM wire and made sure it is the RPM.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: August 21, 2005 at 4:29 PM / IP Logged  

How did you connect the G.M. VATS ?

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer