2003 Jeep Power Door Lock Contacts

As requested. Jeep Power Door Lock Pin Contacts. Size 1.5 X 3/8 x .7 inch. I just found time to upload this picture. Made specificaly for Jeeps due to space restrictions. More on my site about them in the Jeep page. http://mysite.verizon.net/vze6seqk/ Knowledge is Indisputable, Opinions are Subjective.

Great information jhgraham.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sweet! Who did you get to do the injection molding for you?

My surrogate son Eric who is a Model Maker for a medical firm made the parts. The parts are made from bar stock, Delrin AF, and not injection molded. Any quantity should be injection molded to reduce cost. The parts can be mass-produced and sold if someone wishes to do so, you have my blessings. I have passed on the drawings to Jeep for future consideration. Knowledge is Indisputable, Opinions are Subjective.

CAUTION!! I have posted additional pictures of the installation on my web site in the Jeep page. http://mysite.verizon.net/vze6seqk/. Those who are thinking of implementing door locks should be very careful and not stray from my design guide located on my web. You risk drilling into the window jam and cause major problems if the dimensions are not followed. The installation was very easy and took about one hour per door. This is with rechecking everything twice before cutting. Knowledge is Indisputable, Opinions are Subjective.

I use Van Sliding Door switches also............work good & have rubber bootsMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

The sliding door switches have a length of 2.5 inches and a width of 1.25 inches. I would be interested in seeing a picture of the installation on a 2003 Wrangler. This is the space you have to work with. As I see it the maximum width is .38 inch for the switch and must be mounted as shown. Knowledge is Indisputable, Opinions are Subjective.