Started Integra Enclosure Today

I finally got started on my enclosure today after a couple months of hold up. Im making a subfloor with a single dd3510 in the center and my amps on either side. The mold went pretty smoothly besides a couple issues with the hardner. I put down 6 layers so far, but i think i am going to put down one more after i get the sides cut and fit to the mold. Here is what i have done so far. Pic 1 Pic 2

doesnt look like imagestation likes me. Where to you guys host your pics?

I use photobucket. Never had a problem with them.Learning the trade one fiberglass creation at a time!

There were a couple of small air bubbles in the first layer and I didn't mix the first batch hot enough, but it came out pretty good, and I am gettin ready to cut the sides out of 3/4 mdf. Tommarrow I should be pretty much done, and I will hopefully get a couple more pictures.

Heres what I got done today.Tomarrow I am going to finishing glassing the box and trim down the mold, and then hopefully get the top cut.

looking good Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

I didnt get the top cut, but i finished glassing the box. Tomarrow or Tuesday I am going ot try to get everything mounted and the top finished.

That looks awesome man, is this your first glass project? Learning the trade one fiberglass creation at a time!

Yea this is my first time fiberglassing, and this is actually my first "stereo". The thing is Ive spent months researching so hopefully it will turn out pretty good, which it is so far. Tonight, I only have a couple hours to work, but Im going to try to get the amps mounted, and brace the lids for the subfloor. I am making lids that are hinged to the top of the enclosure so I have a clean look but easy access to the amps.