Started Integra Enclosure Today

Ive got a quick question if you guys dont mind. I have layed 2-3 layers attaching the mold and the sides, and I filled and gaps between the two on the outside with epoxy, along with two more layers on the outside. Do you think that should be enought or should I do more? As of now the floor is 7 layers thick in the middle and 9 directly underneith the sides (I layed down 2 short layers under the wood right before screwing the two together).

yes do what you think is nesisary if the sub is going to be puting alought of pressuer on that area then you need to reinforce it. but that epoxy sould hold up real good. do gust do it as a precausin and put down an extra layer were you think is nesisary. hope this helps good luck looks good AaronWant to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

I got the top cut, but I am still working on mounting the amps, hope to wrap it up this next week.

looks good cant wait to see it when its done

Hows this project coming along? Looking good so far. Keep the pics coming.Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs

Its getting there, I am currently trying to finish up on the mounts for the amps, and then I need to get everything covered. Heres another picture from the other day.

looking good, nice and clean, is that sound dampening material over the trunk floor? Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

It is, I sprayed 3 gallons of bedliner along with 50sq feet of bquiet, 15sq ft of vcomp, and a good bit of foam before starting this. Im getting close to wrapping this project up, but I havent had a whole lot of time lately.

shhh !! That sub is gonna sound sooo good in that trunk Clarion DB36MP

Infinity Kappa Perfect 10"

Respone 800w Mono

ALPINE MRP-F250

*Custom fabrications*

Did some more bracing.