the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Glass break sensor bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
Agdodge4x4 
Copper - Posts: 108
Copper spacespace
Joined: October 23, 2003
Location: United States
Posted: November 04, 2005 at 6:05 PM / IP Logged  
How do you bypass the glass break sensor when arming?
I am getting a 'bypass notification' chirp when arming my truck, and the zone that is flashing on the led is zone 4, which is the glass sensor. Don't know why. I turned off the bypass notification, but thats only for the zone 3.
pss5075104 
Copper - Posts: 144
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: November 04, 2005 at 8:26 PM / IP Logged  
What kind of an alarm is it, and is it soldered into other sensor wires?
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Agdodge4x4 
Copper - Posts: 108
Copper spacespace
Joined: October 23, 2003
Location: United States
Posted: November 04, 2005 at 10:03 PM / IP Logged  
It is a Matrix 10.5X. The glass break sensor is not soldered to anything, it is a direct plug in. Its got its own zone (zone 4). If the directions are correct, then the glass break sensor should NOT be active until 3 seconds after you arm it, so there is no way it can be picking up some noise somewhere. It does this whether you arm it in silent mode or normal. The other sensors are direct plug in play too, nothing special on this alarm.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, September 20, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer