Clifford remote start Programming problem

Home / the12volt's Install Bay / Car Security and Convenience / Clifford remote start Programming problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

c5sb

Member - Posts: 17

Joined: August 23, 2005

Location: Canada

Posted: November 17, 2005 at 6:13 PM / IP Logged

thanks a lot for the answer

Back to Top

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: November 21, 2005 at 11:50 PM / IP Logged

Is this installed on a manual transmission. Because if it is you have to push different buttons to do manual trans safestart so the car will shut off when you exit. You might be turning on shortstop which will keep the car running while the alarm is armed. Doesn't solve your tach problem but it is a place to start. By the way there is always a single blue wire with a plug on it not connected to anything and taped to a harness under the hood on hondas which cliffords love for tach signals

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford remote start Programming problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.