Window module and pulse timer 528t

Home / the12volt's Install Bay / Car Security and Convenience / Window module and pulse timer 528t (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: November 20, 2005 at 12:59 PM / IP Logged

Out of curiousity, why do you need the timer? If this is a roll-up situation, most roll-up units only need the negative pulse to start the roll-up sequence. They usually will roll up in order even if there is no constant ground input on the trigger wire.

You should wire a relay that only allows the window rollups to work when the Ignition is off. You don't want to be driving down the road and have a child hit the lock button on the door and have the windows start rolling up on them. Never know where there arms may be.

Steve G

wester97

Member - Posts: 32

Joined: November 19, 2005

Location: United States

Posted: November 20, 2005 at 1:08 PM / IP Logged

It will receive the pulse from the door lock coming from my keyless entry, a different wire than the lock switch. I was under the impression that it needed a pulse timer from this article:

http://caraudiomag.com/technical/0508cae_metro/

The window module has 12+ and ground - does it still need to be given ground from the timer?

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: November 20, 2005 at 1:17 PM / IP Logged

It depends on the module. My rollup module takes a pulse to activate. Once it recieves the pulse it does all the work from there. It starts rolling up window 1, when it hits the top window 2 starts rolling up...so on & so on until all four are rolled up.

Steve G

wester97

Member - Posts: 32

Joined: November 19, 2005

Location: United States

Posted: November 20, 2005 at 4:10 PM / IP Logged

What module do you have? Mine is made by Galaxy - module ACCWR - 8

Do they all roll up the windows sequentially? I wanted them to roll up all at once.

Also, is there anyway to make the horn honk once they are all up? That would be cool

wester97

Member - Posts: 32

Joined: November 19, 2005

Location: United States

Posted: November 20, 2005 at 10:01 PM / IP Logged

Anyone know the answer? Do I even need the pulse timer?

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: November 20, 2005 at 10:49 PM / IP Logged

Does you manual look like this one?

http://scytek.net/pdf/WindowRollup.pdf

♦ Quick-connect & disconnect plug

♦ Roll-up and Down 2 windows

♦ Roll-up 4 windows

♦ Fits most cars with existing power windows

♦ Use high quality relays for control module

♦ The System allows (-). Pulse or Constant Trigger

♦ Auto-sense to stop window roll-up when closed

♦ Automatic temperature Control Ventilation

♦ Remote Manual Venting

♦ The safety controls. During Window Roll-up it will

Automatically Stop the Window if anything impede the

Motion.

Just test it and see.

Steve G

wester97

Member - Posts: 32

Joined: November 19, 2005

Location: United States

Posted: November 21, 2005 at 12:51 PM / IP Logged

actually, that doesnt look like mine. I looked at that manual as well online.

All mine says is 500mA activation. Anyone know if i need the pulse timer or not?

CoppellStereo

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: November 21, 2005 at 2:22 PM / IP Logged

Why do you keep asking that? TEST IT

Steve G

wester97

Member - Posts: 32

Joined: November 19, 2005

Location: United States

Posted: November 21, 2005 at 2:52 PM / IP Logged

This is my first project like this. Just wanting to make sure i do it right. I'll try it and let you know

CoppellStereo

dualsport

Silver - Posts: 983

Joined: September 27, 2005

Location: United States

Posted: November 23, 2005 at 12:23 AM / IP Logged

It's always a good idea to bench test it before installing anything, and especially if it's something you've never done before.

Never much fun undoing all your careful work dressing the wires and mounting everything, only to find you had the wrong idea about how it works, or the thing's defective.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.