Window module and pulse timer 528t

We worked with this module and timer today, connected it as mentioned above, and here are the problems we ran into

Without actually connecting to the window we are unsure how to test that the window module is working - it should send out +12 to the window motor to roll it up correct?

Measuring voltage of the wire that goes from the timer to the window module showed that there is a constant current that breaks when the timer is activated.  So then we cut the blue wire loop on the timer, nothing changed - there was still a constant current from the activation wire.

Could we be connecting it incorrectly?:  (connected as mentioned in the 2nd post:)

awesome information.  Still not quite sure how to hook up the 528t correctly.  I totally understand how to hook up the window module, but just not the pulse timer to activate the window module.

Black - Ground

This sound right?

without hooking up the timer, how can i make sure it is sending a longer timed pulse to the window module since the 'activation wire' is always sending +12v?