2004 Mazda 3, carvox alarm/RS

 look rite next to the battery. in the big plugfarthest away from the firewall. white, WHITE/ red, WHITE/ lt.blue, WHITE/ lt.green

pick one, its a 1 cylinder signal

This link has pictures to alarm wires including the tach wire.

http://www.mazda3forums.com/index.php?topic=27776.0

I bought one of these Carvox combos two months ago. I don't have any problem with the alarm, but the starter is terrible. Haven't been able to fix it yet, so I disconnected the starter and I am using only the alarm. My car is a 2004 Mazda 3 and the wiring diagram doesn't show anything for a the 2nd starter, it says N/A. My problems with the starter are:

- when it is cold, the brain does't like the high rpm and the alarm goes off.

- If it is not cold, when I start remotely, the car starts but the brain doesn't sense the tack signal and keeps kranking.

- sometimes, the car doesn't start and the remote shows the hood is open. Like others, the hood pin in my car is not connected.

Any suggestion is welcomed.

Lybeck: Regarding the programming the door status warning that was posted earlier, I followed the manual's instruction and I could disable it. It is the Feature #5 and you have to put it on Option 2 (OFF) based on the instruction on page 19.