the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Man this is alot of work, First Fiberglass Project


Post ReplyPost New Topic
< Prev Topic Next Topic >
total_overkill 
Copper - Posts: 93
Copper spacespace
Joined: November 24, 2005
Location: Canada
Posted: December 23, 2005 at 8:36 PM / IP Logged  

well I started my first project. I made alot of mistakes but I am sure sanding and a bit of fibreglass bondo will even it all out for the secound layers.  I included a custom box I am starting which made this alot of fibreglass to deal with. I am getting better though.

http://www.grandsontario.com/forums/index.php?act=ST&f=52&t=10343&st=0#entry110272

40 grit has saved my life sometimes =[
ragoal12 
Copper - Posts: 135
Copper spacespace
Joined: July 23, 2005
Location: United States
Posted: December 23, 2005 at 9:24 PM / IP Logged  
yes FG is alot of work... but when done right it looks great in the end and gives you a one of kind system... no offense but your system seems alil over kill.. have you tested this setup?? or is this just what you think is cool???
S.O.B custsoms.. South Omaha, Nebraska
total_overkill 
Copper - Posts: 93
Copper spacespace
Joined: November 24, 2005
Location: Canada
Posted: December 23, 2005 at 9:58 PM / IP Logged  

been wired  and rewired taken out and put back in like 5 times in the past 4 months.

40 grit has saved my life sometimes =[
darreng 
Member - Posts: 38
Member spacespace
Joined: December 12, 2005
Location: United States
Posted: December 23, 2005 at 9:59 PM / IP Logged  

ragoal12 wrote:
no offense but your system seems alil over kill

no kidding, are going for show or do you just have way too much money?

total_overkill 
Copper - Posts: 93
Copper spacespace
Joined: November 24, 2005
Location: Canada
Posted: December 24, 2005 at 12:06 AM / IP Logged  
Show. Not enough money =[ thats why its alot of work LOL =]
40 grit has saved my life sometimes =[
jlord16 
Silver - Posts: 322
Silver spacespace
Joined: September 08, 2005
Location: Australia
Posted: December 24, 2005 at 1:35 AM / IP Logged  

shuld look kool though

Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
darthness 
Copper - Posts: 136
Copper spacespace
Joined: December 12, 2004
Posted: December 24, 2005 at 2:24 AM / IP Logged  
i have a question for you... why did you use FG for a flat peice? its not onyl a waste of time and effort but not as strong as a MDF.
total_overkill 
Copper - Posts: 93
Copper spacespace
Joined: November 24, 2005
Location: Canada
Posted: December 24, 2005 at 9:57 AM / IP Logged  
Mdf under the fibreglass
40 grit has saved my life sometimes =[
mi_what 
Copper - Posts: 208
Copper spacespace
Joined: April 20, 2005
Location: United States
Posted: December 25, 2005 at 10:09 AM / IP Logged  
Just me but I notice that youare mixing alot of different brands...any particuliar reason? you have two RF amps 3 Pioneer amps, two alpine subs and two pioneer subs, two kaption 6x9s and two alpine 6x9s. I know that monetary changes effect it and all, but is there any other reason? I would have to second that it is a bit overkill, but looks like it will be fun. What type of wires/distribution blocks are you running? also one last question, are you bridging your batteries? I noticed that you have a separate one in the back but is that all you have powering your system? Is one of those amps dedicated to your front stage?
total_overkill 
Copper - Posts: 93
Copper spacespace
Joined: November 24, 2005
Location: Canada
Posted: December 25, 2005 at 10:34 AM / IP Logged  

got a good deal on the amps and equiptment. Batteries run off a 200 amp stinger relay. 140 amp alternator. 150 amp fuse.  3 1.0 farad capacitors. maybe adding a 25 farad also. 1 gage wire. 2  pioneer amps dedicated to 6x9s  1   pioneer amp dedicated to 350 watt subs and tweeters up front 2 RF 1000's to free air subs 10 and 12 inch

it will look a heck of alot better than this also

Man this is alot of work, First Fiberglass Project -- posted image.

Man this is alot of work, First Fiberglass Project -- posted image.

the other amp isnt shown.

this was the old backseat Yuck. this box will get rid of it all and look good. =] 6X9's are going to be embedded in the box I making.
Man this is alot of work, First Fiberglass Project -- posted image.

and this was a temp setup before the freeair design. A ratsnest yes but it was temp.

Man this is alot of work, First Fiberglass Project -- posted image.

40 grit has saved my life sometimes =[
Page of 9

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, September 25, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer