2004 silverado security light on

Installed remote start...used a PLZAP Bypasskit bypass...works fine except security light stays light, even a key start...if i switch to a PLXR bypasskit, will that solve the problem??

If the light stays on with the Key:.....  You may have to have to have a Scanner to delete the trouble codes or Dealer to do it.

Double check your wires & make sure all the Ignition wires are Powered under Remote Start.

Constant 12 volts	RED OR RED / WHITE	IGNITION SWITCH HARNESS
Ignition 12 volts	PINK	IGNITION SWITCH HARNESS
Starter	YELLOW	IGNITION SWITCH HARNESS

Ignition #2	WHITE	IGNITION SWITCH HARNESS
Ignition #3	ORANGE	IGNITION SWITCH HARNESS
Accessory	BROWN	IGNITION SWITCH HARNESS

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

All wires are powered that you have listed....but isn't the orange an accessory wire not ignition?? I thought perhaps it has to do with the bypass not being the correct one. Or would that not affect the light if I use the key?? The key sense wire is not used with the PLZAP bypass Im using...it wires to the RED / white where a PLJX wires to the yellow, brown and the key sense wire. The supplier who sold me the PLZAP says it should work but perhaps I should try wiring to a neg on the relay pack instead of the neg when running so it doesn't drop out during crank....Any of this correct or not correct??

but isn't the orange an accessory wire not ignition?? Yes it is and you dont need the brown powered up

Also use a GM-SL they always work. I use them all the time.

Do you think it's the bypass??? Will I need to clear a code?? I've already ordered the PLJX bypasskit so that will be my next try.....or should I try the neg line that normally goes to neg on run only to a neg on the relay pack so it doesn't drop out...make any sense?

The by pass kit you have . Do you have to cut or splice the passlock wires?

I have a PLZAP....it wired by cutting the RED / white only of the passlock wires

trtex wrote: I have a PLZAP....it wired by cutting the RED / white only of the passlock wires

Pass lock wires are pink or yellow or white. in your case it prolly (yellow). black is the - side or o/blk