the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Nissan Frontier remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
holtonch 
Member - Posts: 5
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: January 25, 2006 at 11:26 PM / IP Logged  
Need tachometer wire and location for 3.3L V6
holtonch 
Member - Posts: 5
Member spacespace
Joined: December 30, 2005
Location: United States
Posted: January 25, 2006 at 11:29 PM / IP Logged  
Also need Ignition 2 and Accessory 2 and 3 if applicable
iskidoo 
Silver - Posts: 1,040
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: January 25, 2006 at 11:50 PM / IP Logged  
http://directechs.com/directwire/print.asp?action=select&yr=3261&product=Remote%20Start
Tachometer ~ pink/blue or black ~ instrument cluster or ECM
Notes: The ECM is located below the heater box to the right of the accelerator pedal, behind trim panel. The tach is in the top row, 3rd pin left of center of the plug. The VSS is in the 2nd row from the top, 4th pin right of center.
Ignition       BLACK/ white    +   ignition harness
2001 Nissan Frontier remote start -- posted image.
Accessory       RED / yellow    +   ignition harness
2001 Nissan Frontier remote start -- posted image.
2nd Accessory** WHITE/ blue    +   ignition harness
**Not required for remote start.
Steve G
jacqueslacombe 
Copper - Posts: 124
Copper spacespace
Joined: December 04, 2005
Location: Canada
Posted: January 26, 2006 at 12:42 AM / IP Logged  

Don't forget nissan car need (2)  starter wire (1) ign (1) acc to work  and for the tach  you can always use an injector usualy there are easy access

IGN=blk/white

acc=RED / yellow

starter 1=blk / YELLOW

starter 2=GREEN/ YELLOW                         blk=black

cosmoworks 
Copper - Posts: 144
Copper spacespace
Joined: June 02, 2004
Location: United States
Posted: January 26, 2006 at 11:08 AM / IP Logged  
Tach is definitely pink/blue at the ECM pin #3, which is located on the floor to the right of the gas pedal (you can actually see the ECM in iskidoo's picture.
To find pin 3 at the ECU, it's the 11th pin from the top left on the connector.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer