Modding Avic-N1/N2 Nav DVD’s

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation - Hot Topics / Modding Avic-N1/N2 Nav DVD’s (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

b18c5er

Member - Posts: 30

Joined: March 03, 2006

Location: Canada

Posted: April 17, 2006 at 8:39 PM / IP Logged

free_refil wrote:

Ya the upload is mine. I dunno why you can't connect, probably because I was paused for a minute there. Just let it run, and make sure your torrent client is setup properly with your router, etc.

It's been running for around 12 hours now. I'm only finished 10%. I'm using BitComet with a Linksys 4-Port Wired Router.

Any tips on how I can make it go faster?

Thanks.

coaldat6

Member - Posts: 5

Joined: March 02, 2005

Location: United States

Posted: April 17, 2006 at 10:31 PM / IP Logged

I used to use bitcomet but then i switched to uTorrent and it seems to be much faster. However, the problem is that the unfinished files are incompatible so if you install utorrent, you'll have to restart the download from scratch.

More importantly though, are you using Upnp Port fowarding? If its enabled in your router and on BitComet it should speed things up considerably (assuming the seeders are providing enough upload bandwidth)...

b18c5er

Member - Posts: 30

Joined: March 03, 2006

Location: Canada

Posted: April 17, 2006 at 11:34 PM / IP Logged

[QUOTE=coaldat6]

/QUOTE]

Port Forwarding is enabled but I don't know what port numbers to enter into the ranges for BitComet. I'm now sitting at a whooping 15% completion. lol

coaldat6

Member - Posts: 5

Joined: March 02, 2005

Location: United States

Posted: April 18, 2006 at 12:51 AM / IP Logged

BitComet should enter the number automatically... generally it will be the listening port that you see in one of the bitComet menus

Your biggest problem is probably that there are very few seeders. This cannot be helped. There are only a few people interested in this torrent.

free_refil

Copper - Posts: 72

Joined: November 10, 2005

Location: United States

Posted: April 18, 2006 at 6:00 AM / IP Logged

Hey guy's, it's goin' to be a slow upload for a while. I can only spare around 150-175K and I'm upping to 4 people. Hopefully you guys will continue to seed after it's complete! I am still seeding the 50MT disks as well as the West Coast DVD of the 60MT. However, I have limited those to 25K each for the moment so that the East Coast DVD will have the most bandwidth. I will stop the West Coast 60MT as there are 3 other seeders I am connected to at the moment, that should give you guys a little more bandwidth. Please be patient I am only one man with 1 cable line!

Pioneer AVIC-F700BT

Polk Audio MM6

Alpine MRD-M605

Alpine MRV-F450

Alpine SWR-1242D

RF 1 Farad Cap

Streetwires ZN Interconnects

KnuKoncepts Power Wire

sush1a

Member - Posts: 17

Joined: August 01, 2004

Location: United States

Posted: April 18, 2006 at 9:56 AM / IP Logged

wow, that was fast... finished the east disc in less than 12 hrs.. and leaving it on...

b18c5er

Member - Posts: 30

Joined: March 03, 2006

Location: Canada

Posted: April 18, 2006 at 10:36 AM / IP Logged

free_refil wrote:

Thanks man. I really appreciate it. My speed has increased a significant amount. I should be done the download in another day or so.

BTW, after I'm finished the downloads, how do I go about updating my AVIC-N2 with the N3 software? Do I ned the East and West Discs to do so? Because my West Disc will finish in an hour or so, just wondering if I can update it with the West Disc while the East is downloading. I don't use the West Disc at this time, only the East one.

Thanks.

coaldat6

Member - Posts: 5

Joined: March 02, 2005

Location: United States

Posted: April 18, 2006 at 5:15 PM / IP Logged

When you pop in the 60MT DVD it automatically updates. It only takes like 3 or 4 minutes so you may as well wait until you download the East Disc.

(I'm not sure if using the West would be a problem... but i don't think it will be able to use the 40 or 50 series disc afterwards so don't install it until you know you have a working East 60MT disc.)

b18c5er

Member - Posts: 30

Joined: March 03, 2006

Location: Canada

Posted: April 18, 2006 at 5:38 PM / IP Logged

coaldat6 wrote:

When you pop in the 60MT DVD it automatically updates. It only takes like 3 or 4 minutes so you may as well wait until you download the East Disc.

Thanks for the tips. The only way I know that my copy is working is when I pop it into the unit and see if it reads, right?

coaldat6

Member - Posts: 5

Joined: March 02, 2005

Location: United States

Posted: April 18, 2006 at 5:54 PM / IP Logged

well after you burn it, just make sure the competer can open the DVD and you can see the files present.

But yea... you just have to pop it in and see... (deep breath, crossed fingers and all)

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.