remote start on aladdin 2000

o.k here is what i hooked up from the alarm. let me know if i forgot to hook up any wires.

P10:

door(-) > blue                                                                                                        

brake(+) >white

tach or alt(-/+)>gray/blk

accesory(+)>pink

trunk/hatch(-)>yellow

siren(-)<brown

P6 harness:

Main power 1(+) red

Main power 2(+) RED / white

starter (+)>white

ignition(+)> yellow

heater/a/c(+)> blue

ground(-) black

P9 harness:

Door lock(+/-)>green

door unlock(+/-)> blue

Door lock/unlock polarity(+/-) RED / black

just take this chart and put the color wire that you would hook up from the car. i'm not too sure about the p6 harness, if i have everything hooked up right. i'm thinking its either that or there is a delay set on the remote start. as in the programming on page 17 in the installation manual bank 2 option 3 or a wire in the p6 harness is not connected right. i think i have everything else connected right cause the siren works, door trigger works, trunk trigger works, and the doors unlock and lock when you disarm and arm it. also the brake switch is connected right because if it wasn't i wouldn't be able to program the remote(which i did do)and the tach wire is also connected properly because i hooked it up to the tach wire coming from my aftermarket tach(which functions correctly) and i programmed the system to learn the tach.

thank you for your help and time i appreciate it

door(-) > blue-------------------- lt. GREEN/ red                                                                                                

brake(+) >white-----------------GREEN / WHITE

tach or alt(-/+)>gray/blk--------- BLUE

accesory(+)>pink----------------- yellow @ steering column 

trunk/hatch(-)>yellow--------------- grn/blk 2 sil.dot *1|-  |blue conn. above fusbx   On 2 doors, solid green w/ two silver dots.

siren(-)<brown---------------------- To siren

P6 harness:

Main power 1(+) red------------------ white               |+  |steering column

Main power 2(+) RED / white--------- white               |+  |steering column

starter (+)>white-------------------- BLACK/ white         |+  |steering column

ignition(+)> yellow------------------ BLACK / YELLOW        |+  |steering column

heater/a/c(+)> blue------------------ yellow              |+  |steering column 

ground(-) black----------------- CHASSIS

P9 harness:

Door lock(+/-)>green-------------- GREEN / WHITE         |-  |2pin plg blue-taped to blue plg behind f-box

door unlock(+/-)> blue------------ GREEN/ red    |-  |2pin plg blue-taped to blue plg behind f-box

Door lock/unlock polarity(+/-) RED / black---------------------- GROUND

i'll let you know tomorrow about the wires on the p6 cause my brother has the car and by the time he gets back its going to be late. but i'll check them first thing tomorrow.