the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power but no sound 99 camry, pioneer dek


Post ReplyPost New Topic
< Prev Topic Next Topic >
stalt 
Member - Posts: 23
Member spacespace
Joined: May 06, 2003
Location: Canada
Posted: March 09, 2006 at 9:08 PM / IP Logged  

Hey all,  I think the deck is bad, but maybe I am missing something.

Have a 99 camry and had a Pioneer DEH-P4400 in it.

Just got a DEH-P6700MP.  Got a new wiring harness soldered it up and stuck it in...The Unit poweres up but no sound.  EQ shows deck is picking up sound when in both CD and Tuner modes.

Put the ond deck back in and it works....rechecked all solders and retaped to be sure no stray wires were sticking out and tried it again....Same thing. Power but no sound.

Thoughts?

Stalt
mad550 
Copper - Posts: 201
Copper spacespace
Joined: February 23, 2006
Location: Australia
Posted: March 09, 2006 at 9:22 PM / IP Logged  
Check car for shorts specifically in the rear speakers
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 09, 2006 at 9:26 PM / IP Logged  
You need to power up the factory amp.  Connect the blue wire in the aftermarket harness to the new radio's blue/white wire.  Some Toyotas have the amp below the factory radio and you can simply unplug the amp, and plug in your new stereo there, effectively bypassing the amp.  Your's should be behind the glove box.
My ex once told me I have a perfect face for radio.
stalt 
Member - Posts: 23
Member spacespace
Joined: May 06, 2003
Location: Canada
Posted: March 09, 2006 at 9:48 PM / IP Logged  
I didn't have the blue wire connected with the 4400 and everything works fine....is there a reason it is required with this new amp?
Stalt
stalt 
Member - Posts: 23
Member spacespace
Joined: May 06, 2003
Location: Canada
Posted: March 09, 2006 at 10:46 PM / IP Logged  

Checked the harness in the car and there are no wires into the 2 spots where the blue wire would connect, so Guessing that is notthe issue.

Any other suggestions?

Stalt
ophidia31 
Copper - Posts: 78
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: March 09, 2006 at 11:21 PM / IP Logged  
do any of the speakers pop when you turn the radio on? ive found that some stereos do that and it leads to a shorted speaker somwhere. other wise it might be the radio itself. disconnect the 4 speaker hookups and try hooking and external speaker up (if you have one laying around) a house speaker would do if its not 2ohm. if there still isnt any sound then its a bad deck.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: March 10, 2006 at 9:08 AM / IP Logged  
disconnect the speaker laeds and hook up a test speaker to the wires coming from the deck... does the test speaker work? if no, you likely have a blown O/P in the HU... if it does you likely have a short in the wiring... grab a meter and meter every speaker wire for continuity to ground... if you get a reading then that wire is shorted to ground... test them all..... it's unlikely this is the problem if the 4400 works fine....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: March 10, 2006 at 9:51 AM / IP Logged  
Is there a ground in the toyota harness? If not then that can be a big issue. Some older decks are able to work by grounding through the antenna where as the newer decks cant. If the old deck was grounding through the antenna only and the new one cant that would explain it. On the newer pioneer decks, if you ground through antenna only it will light up but not play audio.
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
stalt 
Member - Posts: 23
Member spacespace
Joined: May 06, 2003
Location: Canada
Posted: March 10, 2006 at 2:37 PM / IP Logged  
YEs there is a ground in the toyota harness
Stalt
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 10, 2006 at 4:59 PM / IP Logged  
Sorry, I skimmed through the part where you already had an aftermarket deck before.  I second Kgerry's advice.
My ex once told me I have a perfect face for radio.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer