intellistart

Home / the12volt's Install Bay / Car Security and Convenience / intellistart (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

an203888

Member - Posts: 3

Joined: May 10, 2006

Location: United Kingdom

Posted: May 10, 2006 at 4:12 PM / IP Logged

Hi,

I am installing intellistart in a manual car (intellistart4 G5 & c300). First put it in a few days ago and managed to get it to remote start in automatic mode and also “shortstop”. Wasn’t able to try manual mode out as I did not have the correct remote to transmit channel 11 for “safestart” when you shut the engine down. I have now got a new remote that does transmit channel 11.

The problem is that when the car is running and I transmit channel 11 it should flash the indicators twice and then allow me to shutdown, however it will only flash once and wont allow me to leave the engine running and take the keys out. I thought I would also try it in automatic mode to see if it would still “shortstop” as it did before but it doesn’t.

Bonnet, door and handbrake sensors are all working well. Not 100% sure RPM is working as its wired straight into the Hondas RPM out but have had problems with Hondas RPM output before and don’t believe it gives a true negative of the coil.

I want to know what the one instead of two flashes means, must mean something but cant seem to find out.

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: May 10, 2006 at 6:40 PM / IP Logged

the manual is wrong to begin with the wire that you earth for manual mode you actually do not connect for manaul mode.

what remote to you have

you don't need a radar remote to prime the system for starting later.

if its a 3 button remote you need the wizzard to program teh manual start button.. if its a 4 button the deefault is the 2 bottom buttons pressed together

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

an203888

Member - Posts: 3

Joined: May 10, 2006

Location: United Kingdom

Posted: May 11, 2006 at 1:25 AM / IP Logged

I know about the manual being wrong. Bloody thing!! THe blak/green wire is NOT connected to earth - meaning manual mode. I have this remote and can definitly transmit channel 11 - just want to know what the one flash rather than two means?

intellistart - Last Post -- posted image.

Back to Top

an203888

Member - Posts: 3

Joined: May 10, 2006

Location: United Kingdom

Posted: May 11, 2006 at 1:26 AM / IP Logged

intellistart - Last Post -- posted image.

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 21, 2006 at 5:10 PM / IP Logged

so what does the one flash mean i am experienceing the say exact problem it starts fine in auto mode but i cant get manual mode to work and i experience the one flash also and the manual makes no reference to one flash

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

intellistart

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.