JL Stealthbox

Home / the12volt's Install Bay / Car Audio / JL Stealthbox (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

xsportguy

Member - Posts: 11

Joined: July 12, 2004

Location: United States

Posted: May 23, 2006 at 11:07 AM / IP Logged

Has anyone had any experience with the JL Audio stealthboxes? Are they worth the money...going from dual 12's to a single 10 is hard to accept for a space problem in my explorer.

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: May 23, 2006 at 12:34 PM / IP Logged

I have had good success with them. They sound great, the build quality is above average, a little pricy but worth it.

Top Secret, I can tell you but then my wife will kill me.

xsportguy

Member - Posts: 11

Joined: July 12, 2004

Location: United States

Posted: May 23, 2006 at 12:56 PM / IP Logged

I have a 4.5 cu ft box in the back of my explorer housing 2 12' subs running at 600w each. I need to reduce the amount of space they take up and I am considering either building a fiberglass box for the 12's or getting one of these stealth boxes.

Do you know anything about fiberglassing?

Master Asylum

Silver - Posts: 400

Joined: November 05, 2004

Location: United States

Posted: May 23, 2006 at 1:12 PM / IP Logged

If you haven't ever fiberglassed before and don't really plan on taking benefit from teh learning experience it isn't really worth it man. Just go with a custom fab box from JL and call it quits. But if you have a desire to learn, start small with fiberglass. There is even a forum here to help with fiberglassing.

1998 Monte Carlo w/

Eclipse CD8454

2xRockford 5.25" Power 2-way T152C

2xRockford 6"x9" Punch 3-way FRC4369

1xMemphis 16-MCH1300 5-channel

2xKicker 12" L5 Solobaric-2 Ohm

xsportguy

Member - Posts: 11

Joined: July 12, 2004

Location: United States

Posted: May 23, 2006 at 1:15 PM / IP Logged

the reason I asked about the fiberglass is I have done a box before made of fiberglass. I am curious if I could build a similar box to the JL box out of fiberglass mounted in the same spot.

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: May 23, 2006 at 1:35 PM / IP Logged

You probably could make an enclosure to fit where the stealthbox goes but I am willing to bet by the time your done with time, money and quality of the job the stealthbox is probably a better bet. I have installed a couple of these and they fit really well and sound great. just my .02.

xsportguy

Member - Posts: 11

Joined: July 12, 2004

Location: United States

Posted: May 23, 2006 at 4:12 PM / IP Logged

do they hit that hard? I mean for being a small box I dont expect them to pound like a simple 12" box.

polo3211

Member - Posts: 2

Joined: May 23, 2006

Location: United States

Posted: May 23, 2006 at 4:30 PM / IP Logged

I had one in my explorer and I thought it was great considering I gave up no space at all. I think buying either anMTX thunderform or a JL Audio stealthbox is your best bet. Good Luck.

xsportguy

Member - Posts: 11

Joined: July 12, 2004

Location: United States

Posted: May 23, 2006 at 4:34 PM / IP Logged

thanks everyone for the responses I appreciate the input, I 'm still not sure I want to lose all my bass just for some space in the back.

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: May 23, 2006 at 6:27 PM / IP Logged

I guess the 12's are in a ported box now, looking at the size box they are in. Have you thought about putting them in a sealed box? Or are they only for ported box's? I have 2 15's in my Supra in a smaller box than you have your 12's in. Just a thought.

'85 Toy

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.