surface prep for dynamat

Home / the12volt's Install Bay / Car Audio / surface prep for dynamat (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

church_of_bass

Member - Posts: 23

Joined: May 08, 2006

Location: New York, United States

Posted: June 09, 2006 at 12:22 PM / IP Logged

what is the best product to use for cleaning the surfaces of your vehicle prior to applying dynamat?

is it ok to apply it without a roller and heatgun?

thanks

"alcohol and night swimming - It's a winning combination!" - Lenny

Back to Top

Search for other posts by church_of_bass

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 09, 2006 at 1:00 PM / IP Logged

I use denatured alcohol and lint-free wiping cloths. You'll need some kind of roller to assure good adhesion to irregular surfaces.

Support the12volt.com

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: June 09, 2006 at 1:40 PM / IP Logged

get a roller it will apply a lot easier. If you don't have a heat gun try a hair dryer. Alcohol works for cleaning or glass cleaner that contains ammonia (windex, zep 40).

Back to Top

church_of_bass

Member - Posts: 23

Joined: May 08, 2006

Location: New York, United States

Posted: June 10, 2006 at 12:34 AM / IP Logged

awesome...thanks for the help guys

"alcohol and night swimming - It's a winning combination!" - Lenny

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

surface prep for dynamat

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.