Big interior problems

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Big interior problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

dalemilam58

Member - Posts: 4

Joined: July 16, 2006

Location: United States

Posted: July 18, 2006 at 3:41 PM / IP Logged

The problem is not the screw it finding out HOW it is attatched to the piller. This is an adjustable shoulder belt and is enclosed. I can't find the screw to remove it.

If your going to be STUPID you need to be tough or REAL fast.

Back to Top

Melted Fabric

Silver - Posts: 509

Joined: October 24, 2003

Location: California, United States

Posted: July 18, 2006 at 5:39 PM / IP Logged

Ah, ok. Damn it is hard to say without seeing it in a photo.

All I can say now with what you told me is try to find a way to pop the panel off.

Everything is usually held is place with glue, screws, clips, or/and black magic, but black magic is rarely used on vehicles after 1979.

...j/k it IS used in vehicles after 1979. Big interior problems - Page 2 - Last Post -- posted image.

I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Back to Top

davedyer79

Copper - Posts: 178

Joined: February 18, 2004

Location: United States

Posted: July 19, 2006 at 10:31 AM / IP Logged

Hey dalemilam58, are you wanting to go back with the factory color on the dash pieces or go with something custom. If custom, take jeff's advice and use a good solvent to take off all the crap from the dash, a plastic promoter etc.... Search some of the forums and you will find plenty of information.

If you just want to go back to factory look, or just change the color of the factory dye, go to SEM's website and you can buy the dye that just sprays over the panel. You will have to clean it real good, but it is very easy and straight forward. I use it often to change the color of interiors for people who dont want the usual factory color.

davedyer79

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Big interior problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.