93 mazda 929, bulldog 62I

Home / the12volt's Install Bay / Car Security and Convenience / 93 mazda 929, bulldog 62I (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 12:57 AM / IP Logged

Im trying to install the dome light supervison on a 93 mazda 929 and the the alarm is a bulldog 62I.

How do you install the relay to get the dome supervison to work? I have a relay. the door tigger wire was connected to the door tigger wire on the alarm harness.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 18, 2006 at 10:09 AM / IP Logged

i dont see a dome on that car. do you even have a light in that car. i look a 2 wire guides and it was blank.

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 10:17 AM / IP Logged

The alarm has a wire for that

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 18, 2006 at 9:16 PM / IP Logged

well yea "most" alarms have a wire for that, that dotn mean your car does.

Does you car have a doem light that turns on when you open a door. even if it dotn coem on with the door if you have a light you may be able to do it, jsut need to fidn out waht wires to use etc.

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 9:34 PM / IP Logged

The wiring chart shows to use door trigger. so I guess thats whats called the dome light. when you open the door the light comes on.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 18, 2006 at 9:44 PM / IP Logged

hey if your chart show it, i donnt see it on DEI list and code systems

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 9:51 PM / IP Logged

it shows door tigger and it has light when the door is open. I already connected a wire to that trigger wire from the alarm.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 18, 2006 at 9:59 PM / IP Logged

if it say ues door trigger then use that wire. to wire relay

85 wire form alarm

86 to 12 volt

87 to ground

30 to wire in car.

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 10:03 PM / IP Logged

so the 30 on the relay shares the same wire that the door trigger is connected to from the alarm? cause I connected the door pin trigger from the alarm to the door trigger on the car.

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: July 18, 2006 at 10:22 PM / IP Logged

The relay setup I was told to use was

85 to 12 volt

86 to wire from alarm

87 to wire in car

30 to ground

but you have it diffent? your

86 is 12volt

85 I got is 12volt

is this cause of the relay type?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.