the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

530t window module Modification

Home / the12volt's Install Bay / Car Security and Convenience / 530t window module Modification (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
bigman17 
Member - Posts: 41
Member spacespace
Joined: May 13, 2006
Location: United States
Posted: September 19, 2006 at 7:12 PM / IP Logged  

I installed 530t's in my car about a month ago and have had the problem of the drivers window never going all the way up.  I opened up the 530t and tried to match it to one of the diagrams on the DEI Resistor Modification Instructions but none of the diagrams match what I have.  Mine only has to resistors on the board and they are not next to each other.  Are these the resistors that i need to change and if so what size resistor is recommended.  Thanks

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 19, 2006 at 10:41 PM / IP Logged  
You should contact DEI and see if they can help you with this. They will probably require a version number on the module though.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
bigman17 
Member - Posts: 41
Member spacespace
Joined: May 13, 2006
Location: United States
Posted: September 20, 2006 at 1:21 PM / IP Logged  
I think you have to be a certified installer to get technical help.
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: September 20, 2006 at 1:38 PM / IP Logged  
waht the date code of your 530
bigman17 
Member - Posts: 41
Member spacespace
Joined: May 13, 2006
Location: United States
Posted: September 20, 2006 at 1:50 PM / IP Logged  

ok 6d

swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: September 20, 2006 at 2:00 PM / IP Logged  
place the ground in an another place, also may want to go to a bigger power wire, also were did you tap the power into, of all the 530 ive done only a few i had to open up and change resistors in.
ohnelly1978 
Member - Posts: 20
Member spacespace
Joined: January 18, 2005
Location: United States
Posted: September 20, 2006 at 3:04 PM / IP Logged  
had same problem use the power from directly the battery and adjusted the jumpers on the 530t and it was ok
ohNelly!
bigman17 
Member - Posts: 41
Member spacespace
Joined: May 13, 2006
Location: United States
Posted: September 20, 2006 at 7:35 PM / IP Logged  

I use a 8 guage right from the battery and it is grounded to a factory bolt.  I tried all the dip switchs the resistors definetly need to be changed.

auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: September 20, 2006 at 10:31 PM / IP Logged  
The diagram you are looking at was meant for the OLDER version of the 530T, the older version would be at least 5 years old. If you have the new board, like you said doesn't match the diagram, then there is no modification to be made. DEI figured it into the current revision of the 530T.
Pretty much start playing with the resistance settings and lube up the track/regulator. Also do NOT ground inside the door.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
bigman17 
Member - Posts: 41
Member spacespace
Joined: May 13, 2006
Location: United States
Posted: September 21, 2006 at 7:36 PM / IP Logged  
What a bitch, the lovein window should go all the way up.  I didnt spend all that time and money to have something wrong with the window.  It takes like 4 one touches to get the lover all the way up.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer