the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Enclosure Covering


Post ReplyPost New Topic
< Prev Topic Next Topic >
jonathancullen 
Silver - Posts: 282
Silver spacespace
Joined: September 22, 2006
Location: United States
Posted: October 01, 2006 at 9:16 PM / IP Logged  
but should you use rope caulk to seal it?
cloak559 
Copper - Posts: 215
Copper spacespace
Joined: July 14, 2006
Location: United States
Posted: October 01, 2006 at 10:42 PM / IP Logged  
jonathancullen wrote:
but should you use rope caulk to seal it?
Its good practice to use non-hardening rope caulk when installing any woofer, it acts as a gasket...As far as the textured paint goes, since there is a smooth sealer for the top coat, it should be a pretty flush mount...if not the caulk should fix that...Personally, I'm just going to tape off the area where the sub overhang will be...
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz
Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...
jonathancullen 
Silver - Posts: 282
Silver spacespace
Joined: September 22, 2006
Location: United States
Posted: October 03, 2006 at 7:52 PM / IP Logged  
alright cool, imma try this on my next project. what the worst that can happen????? i mess it up and carpet the box anyway. xD
cloak559 
Copper - Posts: 215
Copper spacespace
Joined: July 14, 2006
Location: United States
Posted: October 03, 2006 at 8:30 PM / IP Logged  
nouseforaname wrote:

don't know if i'm on topic, but it's been a long day and all the posts are running together.Enclosure Covering - Page 3 -- posted image.Enclosure Covering - Page 3 -- posted image.

heheh, I feel yah man.....
I was actually thinking of this too. I have a paint booth that I can use at my liesure. I was thinking of spraying a few thick layers of primer down and then just using normal automotive paint and a few coats of clear. I wanted to match it to my cars exterior and then just airbrush the RE Audio logo on top. You think that would work on the MDF?
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz
Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer