the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 Tahoe, Viper 5900, xk510

Home / the12volt's Install Bay / Car Security and Convenience / 07 Tahoe, Viper 5900, xk510 (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
Strizzy23 
Member - Posts: 42
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: October 08, 2006 at 6:43 PM / IP Logged  
im doing a 5900 viper im got everything all done but i cant find the data wire. i think that y i cant get the xk510 to program any help thanks
Strizzy23 
Member - Posts: 42
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: October 09, 2006 at 1:27 PM / IP Logged  
i found out it the green wire but i cant program the bypass anyhelp
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 09, 2006 at 3:28 PM / IP Logged  
Gotta bury a key in that one right... after the loops are around, just try to RS the truck... It should.. if not play with the loops... The door lock portion, wire violet to pin 1 on the odb port.. connect the harness and stick a key in the ign.. should program.. should be firmware gmdl6 1.0 if it doon't work try re-flashing iit...
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Strizzy23 
Member - Posts: 42
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: October 09, 2006 at 3:40 PM / IP Logged  
i will try that the obd2 wire is green i will try what you said and let you know the what happen thanks for the info
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 09, 2006 at 3:46 PM / IP Logged  
no prob, any more help just yell!
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Strizzy23 
Member - Posts: 42
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: October 09, 2006 at 6:29 PM / IP Logged  

i  try that but no lock  programing it so im going to call the tech up in the am. do you know y i have no starter kill i cut the starter wire and put the 1300 resitor in to the starter side and when it is arms it will start but the alarm will go off

thanks Dave

Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 09, 2006 at 10:05 PM / IP Logged  
Sorry, but I'm unframilar with the viper [dei stuff] nd don't have my data base on this PC... sounds like somthng is aray.. I've always done a hybrid tx bypass and a door lock disarm bypass on these. [cost more but works better... ] After a lucern I did , I just removed the resistor and the hybrid bypass worked great... the one with the key... well I havnt had the best of luck with.... I'll be back on in the am, so give me a shout...
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Strizzy23 
Member - Posts: 42
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: October 10, 2006 at 9:30 AM / IP Logged  

they sent me the wrong firmware for the bypass kit from what i under stand is that there is the all in one xk510 that will loose a key but you dont want to loose a key you can used the xk06 for the key and the xk01 for the locks and everything else thanks for the help

Dave

Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: October 10, 2006 at 9:41 AM / IP Logged  
Exactly!.... much better choice... good luck....
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer