Viper Alarm Remote start

Home / the12volt's Install Bay / Car Security and Convenience / Viper Alarm Remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

l3o24k4u

Member - Posts: 1

Joined: November 04, 2006

Location: United States

Posted: November 04, 2006 at 10:20 AM / IP Logged

WHen u installing the alarm u have to put a key in a box of the viper alarm. My question is how does that work, how does putting the key in the box allow u to turn the car with remote

Back to Top

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: November 05, 2006 at 4:25 AM / IP Logged

some new you need to key bypass you can use dei 556u universal bypass you need to put a key on this box not on alarm

Back to Top

ferretvw

Copper - Posts: 188

Joined: September 29, 2005

Location: Pennsylvania, United States

Posted: November 05, 2006 at 12:52 PM / IP Logged

The key goes in the bypass module and sends the transponder signal from the key to the receiver in the ignition itself.

2008 Scion xB

Pioneer AVIC-D3

RF 3Sixty.2 sound processor

Stock speakers (for now ;))

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper Alarm Remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.