87 mustang door locks

Home / the12volt's Install Bay / Car Security and Convenience / 87 mustang door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: November 21, 2006 at 3:26 AM / IP Logged

I did all the spliceing in the drivers kick panel, underneath the dash on the left side... when you take out the side panel you should see a plug, its tucked up under there, the wires are there, the pinl / YELLOW & pink/lt. green wires are there...

what I mean by swith and motor is that you have to cut the wires and one wire goes to the lock actuator and the other to the switches... both my door locks work, when you unlock with the remote both lock/unlock...

sorry for not replying sooner been busy with school...

Back to Top

hotmilk400

Copper - Posts: 55

Joined: November 18, 2006

Location: United States

Posted: November 21, 2006 at 4:05 PM / IP Logged

thanks alot!!! NOW IT WORKS PERFECTLY!!!

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: November 21, 2006 at 7:56 PM / IP Logged

so how did you get it to work?

Back to Top

hotmilk400

Copper - Posts: 55

Joined: November 18, 2006

Location: United States

Posted: November 21, 2006 at 8:16 PM / IP Logged

i had the wires switched.. i had the switch wires going where the motor ones should go.. haha.. thanks alot man.. ! i had it right the first time then, and i was like, no, and i changed the wires around, and then it blow.. then i cut even more wires.. haha... i should of just switched it the first time.. haha.. thanks alot!

Back to Top

faded808

Copper - Posts: 87

Joined: June 02, 2005

Location: United States

Posted: November 22, 2006 at 3:29 AM / IP Logged

hehe :-) yea I had the same problem to, switched the wires around lol, but glad to hear you got things working.....

Back to Top

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: November 22, 2006 at 7:21 PM / IP Logged

BTW heres a tip for doorlocks on all 87-93 mustangs.

Simply remove the left front factory dash grill and speaker. Pull on the taped harness that runs along the firewall and bring it through the speaker hole. It is alot easier to access it there then under the dash, kick or door.

It's 5 wire pink yellow, pink green as anywhere you grab it. Wire the relays there and push it all back into the hole, secure with zip ties, remount the speaker and grill and connect the trigger wires to the alarm. Piece of cake.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

87 mustang door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.