the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1999 Mustang Factory Amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
700zx 
Member - Posts: 4
Member spacespace
Joined: January 03, 2007
Posted: January 03, 2007 at 8:40 PM / IP Logged  
I replaced the head unit and amp in my 1999 Mustang with aftermarket units and now i'm trying to put those factory components in my 1992 Bronco. I don't have all the plugs so i've run into some problems as you'll see...
My bronco has 2 rectangular plugs, one has the 5 wires dealing with power one has the 8 speaker wires going directly to the speakers.    
I have the mustang head unit wired in as the power plug from the bronco plugged directly into my mustang's. This leaves 2 more plug holes in the head unit. I plugged in the speaker relay plug(the one with 8 wires - 2 rows of 4) into the head unit and then into the amp. This leaves the plug of 6 which i don't know what is used for on the head unit. I'm assuming it's not necesary.
The amp now has the 8 speaker wire plug going in, and
nothing more.
I need to know the locations and functions of the pins on the amp. There is a connector with 14 pins, 6 on the top and then 8 on the bottom. The top of the connector has 3 pins, followed by a gap, then 3 more pins.
                 
                 III III
                 IIIIIIII
There is also 6 pin connector which i don't think needs to be used.
If there is anything more i need to know please tell me.   
Any and all help is appreciated! Thank you!
3cc_installer 
Copper - Posts: 43
Copper spacespace
Joined: December 21, 2006
Location: United States
Posted: January 04, 2007 at 1:00 AM / IP Logged  

http://www.installdr.com/Harnesses/Ford-Wiring.pdf

go to this site.

Jared Nixon - A.K.A Jsmoke
3rd Coast Customs
Lake Charles, Louisiana
700zx 
Member - Posts: 4
Member spacespace
Joined: January 03, 2007
Posted: January 04, 2007 at 4:10 PM / IP Logged  
I've read that site and it doesn't tell me anything about the amplifier. I need to know the locations of the pins and their functions. I don't have the factory plugs to match colors either.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 7, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer