viper 791 in rsx

Home / the12volt's Install Bay / Car Security and Convenience / viper 791 in rsx (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dcodner

Member - Posts: 3

Joined: August 18, 2006

Posted: January 29, 2007 at 1:25 PM / IP Logged

I hooked up my 791 in a base 03 RSX. I also added two window modules 530t for my windows and sunroof. My question is, is there anyway to disable the shock sensor while remote starting the vehicle? Or is it supposed to be disabled while I remote start and I just didnt hook up something correctly?

jason quarters

Member - Posts: 18

Joined: August 23, 2006

Location: United States

Posted: January 29, 2007 at 1:38 PM / IP Logged

on the shock senser wire there is a blue or green wire it needs to be connected to the blue w/white, on the harness that has the tach wire in it.

its true!

Search for other posts by jason quarters

dcodner

Member - Posts: 3

Joined: August 18, 2006

Posted: January 29, 2007 at 1:51 PM / IP Logged

Do I need to add a relay? and is it the green wire or the blue wire on the shock sensor harness? Or does it not matter which one?

jason quarters

Member - Posts: 18

Joined: August 23, 2006

Location: United States

Posted: January 29, 2007 at 1:55 PM / IP Logged

if u look the green and the blue on the shock sensor harness accually connect to gether. connetect on of those two to the blue /whit in the harness right next to it. the one in the harness that has the tach within it.

its true!

dcodner

Member - Posts: 3

Joined: August 18, 2006

Posted: January 29, 2007 at 2:02 PM / IP Logged

ok cool. and finally with this effect my remote start since I have that blue/white status output wire connected to my clutch? Thanks for your help.

jason quarters

Member - Posts: 18

Joined: August 23, 2006

Location: United States

Posted: January 29, 2007 at 5:03 PM / IP Logged

no just tie it into the blue/white.

its true!

csnut18

Copper - Posts: 196

Joined: January 27, 2007

Location: United States

Posted: January 30, 2007 at 2:32 AM / IP Logged

Hey on a side note be real careful cause the 791 is not designed for a manual and I have seen crap happen so many times. Funny thing is I saw it happen to a guy just yesterday morning outside my house.

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: January 30, 2007 at 8:08 AM / IP Logged

jason quarters wrote:

on the shock senser wire there is a blue or green wire it needs to be connected to the blue w/white, on the harness that has the tach wire in it.

WHAT THE . . .? Why would you want to short out the signal wires with a status signal?

Actually, the 504D shock sensor is automatically disabled when remote starting. It's 4 pin plug connects directly into the brain and everything is done automatically. Make sure the loop at one end of the cable is connected into the shock and not into the brain.

Are you sure it's the shock? What else do you have? a 508D? a 507D?

I bet it isn't even the shock and that you're just assuming. What zone does the LED on the dash show?

Prepare your future. It wasn't the lack of stones that killed the stone age.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: January 30, 2007 at 6:13 PM / IP Logged

jason quarters wrote:

on the shock senser wire there is a blue or green wire it needs to be connected to the blue w/white, on the harness that has the tach wire in it.

Do NOT do the above. This guy has no idea what he is talking about.

The shock sensor is automatically disable when remote starting. Something else is causing the problem.

jason quarters

Member - Posts: 18

Joined: August 23, 2006

Location: United States

Posted: January 30, 2007 at 7:54 PM / IP Logged

there is a loop at one end and the other end has a blue wire that goes to the blue/white wire to turn off shock sensor when in remote start. thanks but i do have a idea!

its true!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.