spacer spacer spacer spacer

power acoustik amp and subs

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: March 05, 2007
Posted: March 05, 2007 at 8:19 PM / IP Logged  
I have 2-12" 800w Power Acoustik Fubar 12-W subwoofers with dual-4 ohm voice coils and a Power Acoustik A2400DB Class D Amp rated at 900wattsx1@ 4 ohms RMS, 1400wattsx1@ 2 ohms RMS, or 2400wattsx1@ 1 ohm RMS. I am installing them in a sealed dual 12' Sub box.  I need to know what ohm rating I should run them at and how they should be wired-up(series, paralell)? I am new to all this and I am looking for good sound, not loudness. Thanks,Ratdog24
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: March 05, 2007 at 11:21 PM / IP Logged  
use the woofer wiring link here
If those subs are dual 2 ohm than wire them to the amp for a 2 ohm load...that amp will most likely fry at 1 ohm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Sunday, December 5, 2021 • Copyright © 1999-2021, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer