passlock 555l wiring

Home / the12volt's Install Bay / Car Security and Convenience / passlock 555l wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cdreece

Member - Posts: 24

Joined: August 22, 2004

Location: United States

Posted: March 06, 2007 at 5:30 AM / IP Logged

I have a 1998 cavalier do i hook up all wires on the 555L passlock ( blue/black, violet )? My alarm (avistart 6500) has three choices not sure which to use for what wires the choices are:

#1 Accessory Remote Start (-) Input

#2 Alarm Armed Signal (-) Output

#3 Remote Start Activated (-) Output

The 2 wires in question from the passlock 555L are:

#1 Blue/Black (-) Status Input (instructions say) connect this wire to the (-) status output of the directed remote start system

#2 Violet (-) Input from Starter Relay (instructions say)connect this wire to the (-) starter output of the remote start system.This is the violet ribbon harness wire of the pre wired relay pack.

Never done a passlock before got the rest of the alarm/passlock done just waiting for some input for these wires. Car has Passlock 1 Thanks For Any Help

Back to Top

rudydapimp

Copper - Posts: 390

Joined: February 27, 2006

Location: United States

Posted: March 06, 2007 at 7:48 AM / IP Logged

The wires that you need are as follows

Black - connected to passlock ground

BLACK / YELLOW - BCM side of passlock wire

Yellow - Ignition side of passlock wire

Red 12v Constant

Pink Ignition input

Blue/Black Connect to Gray/Black wire

Back to Top

cdreece

Member - Posts: 24

Joined: August 22, 2004

Location: United States

Posted: March 06, 2007 at 12:04 PM / IP Logged

thanks

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: March 06, 2007 at 12:48 PM / IP Logged

I had an Avistart a few years back. I don't remember if it had a (-) when crankin output. If it does, it would be a lot easier. I'll assume it doesn't.

You still need to connect the violet wire to a wire that provides ground only when cranking. You need to split the gray/black wire with diodes. Connect one wire to the blue/black of the 555L. The other wire will need to trigger a relay:

86 - (+) starter wire in car

85 - gray/black

87 - ground

30 - violet of 555L

Back to Top

rudydapimp

Copper - Posts: 390

Joined: February 27, 2006

Location: United States

Posted: March 06, 2007 at 1:18 PM / IP Logged

oh yea, sorry, forgot that the Cav has Passlock I. THought it made the change over to Passlock II.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

passlock 555l wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.