the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

fg and mdf


Post ReplyPost New Topic
< Prev Topic Next Topic >
quadraphonic 
Member - Posts: 8
Member spacespace
Joined: May 20, 2007
Posted: July 01, 2007 at 5:06 PM / IP Logged  

Middle piece is scrap, you would use the FG to draw out TWO sections.  One that you would cut the middle out of the make the first baffle piece, and the other that you would cut the speaker opening out of.  Then you'd just glue and screw that second board to the baffle piece.

It's hard to say if that would be better for what we want to do or not.  I almost want to use dowelling with a mounting ring and fleece the sucker, but I think the MDF approach will make for a better blend with the trunk dimensions.

e36rok 
Member - Posts: 18
Member spacespace
Joined: May 23, 2007
Location: Canada
Posted: July 01, 2007 at 7:04 PM / IP Logged  

I thought the baffle was for the top side not the side for the speaker ring. It would be pointless to do it with the front side then... all these ideas are confusing me and sound like they are completely pointless and more work. I'm going to do it my way and post pics in a new thread when done in 2-3 weeks.

Peace out.
/thread

quadraphonic 
Member - Posts: 8
Member spacespace
Joined: May 20, 2007
Posted: July 01, 2007 at 7:17 PM / IP Logged  
Still looking forward to it!  I should get my butt in gear and make the FG portion.  Maybe tomorrow.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, January 31, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer