remote starter problem, 95 cutlass supreme

Home / the12volt's Install Bay / Car Security and Convenience / remote starter problem, 95 cutlass supreme (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

silverfoxx129

Member - Posts: 15

Joined: September 16, 2007

Location: Michigan, United States

Posted: September 16, 2007 at 11:19 AM / IP Logged

Hi, I have a 1995 cutlass supreme and I installed a remote starter/alarm in it, now when I try to use the remote start I hear the fuel pump start, the lights on the dash light up and then it unlocks the doors and then it stops, I have installed a bypass kit for the vats. The car has remote door openers installed from the factory that I think is the fault, 1 more thing, I unhooked the door lock/unlock wires on the unit I installed and it still unlocks the doors when I use the remote start. thanks in advance, Brad

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 16, 2007 at 11:27 AM / IP Logged

Did you hook up your second ignition what kind of starter is it

silverfoxx129

Member - Posts: 15

Joined: September 16, 2007

Location: Michigan, United States

Posted: September 16, 2007 at 11:30 AM / IP Logged

thank you for the reply, the unit is an HUATAI HT600, there is no 2nd ignition wire. thanks, Brad

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 16, 2007 at 11:51 AM / IP Logged

No No not on the unit in the car there are 2 ignitions one pink and it says purple but it could aslo be pink/white or white

silverfoxx129

Member - Posts: 15

Joined: September 16, 2007

Location: Michigan, United States

Posted: September 16, 2007 at 12:05 PM / IP Logged

I hooked the ignition wire to the pick wire(1st ignition) there was no mention of the 2nd ignition wire in the instructions and I also asked the person that I bought it from how to wire it, would that unlock the doors and shut down the remote start? thanks, Brad

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 16, 2007 at 5:10 PM / IP Logged

Not necessarily but you will definately need that try to remote start the car with the key in the ignition if it starts than there is something wrong with your bypass if not then there is something wrong your install

silverfoxx129

Member - Posts: 15

Joined: September 16, 2007

Location: Michigan, United States

Posted: September 16, 2007 at 5:17 PM / IP Logged

lol. been there done that, that was the first thing that I did. I am hopeing that someone can tell me how to disconnect the factory lock/unlock system that is in the car to see if that is the problem. thanks, Brad

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 16, 2007 at 5:27 PM / IP Logged

Your locks should have nothing to do with it does it start with the key in the ignition

silverfoxx129

Member - Posts: 15

Joined: September 16, 2007

Location: Michigan, United States

Posted: September 16, 2007 at 5:33 PM / IP Logged

the problem is that when I try to use the remote start it turns on the fuel pump sends voltage to the starter then unlocks the doors and it never engages the starter. thanks, Brad

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 16, 2007 at 5:39 PM / IP Logged

First of all hook up the second ignition and remote start the car with the key in the ignition cylinder. Does it start

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.