speaker problems

Home / the12volt's Install Bay / Car Audio / speaker problems (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

zakives

Member - Posts: 9

Joined: September 18, 2007

Location: Georgia, United States

Posted: September 18, 2007 at 5:23 PM / IP Logged

i was recently working on my rear speakers in my trunk when the speaker wire fell and touched a wire connected to my amp. My speakers made a loud noise and now no noise whatsoever comes out of them. any ideas of how to fix?

ZaK Ives

jmelton86

Gold - Posts: 1,228

Joined: February 07, 2007

Location: South Carolina, United States

Posted: September 18, 2007 at 5:57 PM / IP Logged

The rear speakers are powered by an amp? Model #'s of everything involved is nice. Do you know exactly which wire hit where?

2013 Kia Rio -90a alternator

DDX470HD GTO14001 GTO1014D (x3)

Big3 in 1/0G

1/0G to GTO14001

zakives

Member - Posts: 9

Joined: September 18, 2007

Location: Georgia, United States

Posted: September 18, 2007 at 8:11 PM / IP Logged

no rear speakers are not powered by amp . i had a loose connection in my left speaker so i went into my trunk to put a barrell clamp on the wire and it fell and touched where the speakerwire connects to teh amp. amp still powers up and subs still work but no sound at all from front or rear speakers. i thought they could of been blown but there is no distortion and no sound at all

ZaK Ives

dpaton

Copper - Posts: 141

Joined: July 19, 2004

Location: United States

Posted: September 18, 2007 at 11:35 PM / IP Logged

Sounds more like the amp took the hit, not the speaker.

This is not a sig. This is a duck. Quack.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: September 18, 2007 at 11:42 PM / IP Logged

Possible that the deck protection circuit kicked in. Try resetting the deck. If this doesn't help, I suspect you have hurt the outputs on the deck and it needs to be serviced.

There is no such thing as free installation!

kassdog

Copper - Posts: 257

Joined: March 09, 2007

Location: United States

Posted: September 19, 2007 at 2:22 AM / IP Logged

Do you get sound out of the fronts. If you do you might have blown the amp in the deck.

zakives

Member - Posts: 9

Joined: September 18, 2007

Location: Georgia, United States

Posted: September 19, 2007 at 1:22 PM / IP Logged

no there is no sound from front or rear speakers

i will try reseting the deck

ZaK Ives

zakives

Member - Posts: 9

Joined: September 18, 2007

Location: Georgia, United States

Posted: September 19, 2007 at 1:25 PM / IP Logged

reset the deck and still no sound what should i do from here?

ZaK Ives

zakives

Member - Posts: 9

Joined: September 18, 2007

Location: Georgia, United States

Posted: September 19, 2007 at 1:26 PM / IP Logged

zakives wrote:

reset the deck and still no sound what should i do from here?

and i dont think it hurt my amp because my subs are still getting full power

ZaK Ives

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: September 21, 2007 at 12:59 PM / IP Logged

What kind of deck do you have? How did you reset it? Was there a reset button or did you just disconnect the power? Most aftermarket radios have protection circuits for just such an occurance, however I do not know if that is the case with factory setups. It sounds like you probably fried something in the deck. If you have more than one set of preouts you can always get a four channel amp for your other speakers...

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.