2000 saturn sl2, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 saturn sl2, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

plafleursr

Member - Posts: 4

Joined: September 05, 2007

Location: Massachusetts, United States

Posted: September 19, 2007 at 11:23 AM / IP Logged

I have a 2000 Saturn SL2 that I want to install a Ultra Start 1250 remote start in. I believe car has Passlock 2. I also have a DEI 555L. Need to know who to connect both 1250 and 555L. I had both 1250 and 555L removed from other vechicles.

Thanks

Pete

eric-tech

Member - Posts: 20

Joined: September 12, 2007

Location: Quebec, Canada

Posted: September 19, 2007 at 12:44 PM / IP Logged

hi there just the instructions for the 555l on bypasskits.com at http://www.bypasskit.com/getdocument.aspx?documentid=729

make sure to hook up the 2n ign wire from the 555 to the remote starter wire called "out when running" or ground out when running.

programing is easy just follow the steps in the guide.

eric

Take your time, a solution is just around the corner :-)

eric-tech

Member - Posts: 20

Joined: September 12, 2007

Location: Quebec, Canada

Posted: September 19, 2007 at 12:45 PM / IP Logged

oh yeah follow passlock ii indications...

Take your time, a solution is just around the corner :-)

plafleursr

Member - Posts: 4

Joined: September 05, 2007

Location: Massachusetts, United States

Posted: September 19, 2007 at 1:17 PM / IP Logged

My 555L only has 8 pin connector

Red (+)12V

Pink (+) Ignition input

Violet (-) Starter

Blue/Black (- )Activation

Black Ground

BLACK/ White Bulb Check

Yellow To Ign Sw

BLACK / YELLOW To BCM

Is there a new model of 555L ??

Thanks

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: September 20, 2007 at 7:59 PM / IP Logged

there is a new model 556t but what you have will work, violet and blk/white not used, your starter should have a ground out when running(-) hook that to the blue/blk, red to constant hot, pink to ignition hot(pink in car)black to ground at passlock wire(black in 3 wire harness from passlock at ignition) yellow to key side of yellow passlock wire, blk / YELLOW to motor side of same cut yello wire, then reprogram, by starting car with key after install, cant help you with remote start wiring as its not abrand im familiar with but someone on here will be able to help with that, after install, do not ever use factory remotes as when they lock doors they somehow shut out passlock wires and if you try to remtes atrt it you will trip passlock, only lock/unlock with your aftermarket fob

plafleursr

Member - Posts: 4

Joined: September 05, 2007

Location: Massachusetts, United States

Posted: September 21, 2007 at 7:18 AM / IP Logged

Thanks for information. The remote start has a (-) While running/Negative while locked

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: September 21, 2007 at 5:59 PM / IP Logged

thats odd, look again for a wire thats only ground(-)when running, if its ground when locked that means the 555l would be active whenever you lock your doors(or is it only ground when locked for a second?) if the passlock sees ground on that input it would enable someone to hotwire the car if that wires stays grounded all the time when you lock it via remote(check the manual again or double check with someone on here thats familiar with that brand my guess(and its only a guess) is that wire ust only pulse a ground when doors are locked

good luck

plafleursr

Member - Posts: 4

Joined: September 05, 2007

Location: Massachusetts, United States

Posted: September 21, 2007 at 6:52 PM / IP Logged

On another page has (-) when running/ armed. They also use this wire for anti grind/starter kill.

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: September 22, 2007 at 8:10 AM / IP Logged

no not that 1 should be a ground(-)when running only, might be labeled as 3rd ign(-) which would require a relay for a positive 3rd ign, but it would be ground when running, you dont want the 555l to see ground anytime xcept when remote started

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 saturn sl2, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.