the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

flip down tv


Post ReplyPost New Topic
< Prev Topic Next Topic >
dream sound 
Member - Posts: 22
Member spacespace
Joined: August 26, 2007
Location: United States
Posted: October 10, 2007 at 4:20 PM / IP Logged  
how do you in stall and wire up a flip down tv need help? please
ya boy mike 
Member - Posts: 44
Member spacespace
Joined: October 11, 2007
Location: Tennessee, United States
Posted: October 11, 2007 at 11:50 PM / IP Logged  

Carefully!!! And with extra hands to hold it up.

1. Find mounting location

2. Cut hole in headliner and find beam, mount plate, or wood, whichever works for you, I like plates if possible

3. Run wires, usually just Acc. and Ground, if not stand alone unit then A/V cables too and depending on the unit dome lights too

4. Plug it all up and mount it, best to have hood prop or someone else hold it while you make sure it is straight and while you shoot the screws

5. Check the roof to make sure you didnt use screws that are too long

I usually run my wires through the headliner and run them down the A-pillar and tap into ignition harness, just secure the wires in the pillar so you dont pinch them

It Hz
dream sound 
Member - Posts: 22
Member spacespace
Joined: August 26, 2007
Location: United States
Posted: October 18, 2007 at 12:32 PM / IP Logged  
thank you ya boy mike

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, February 3, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer