peugeot 207 1.4 hdi 07

hello I need help setting up an alarm, viper 5091 in a Peugeot 207 diesel 2007 the alarm is already mounted, already opens and closes doors, the base is already running, but I need help for the remote start. need to know which wires to connect, and if I need anything else. and I have a problem when closing the car with the alarm, he occasionally tells the alarm that the door is open but the door is closed, what I'm doing wrong. appreciate any help you can give me.

I apologize it is not 5091 but 5901 was my mistake. When closing the car with the alarm, the alarm says the door is open, but only do it once in a while. excuse my English, is a bit weak what do you mean by dmm thanks

A digital multi meter, it's used to test wires!  Your door ajar problem could be a faulting door switch or maybe you tied ito the dome light wire and you have a delay!  I knew you meant 5901, i was just fooling around! Sorry you didn't catch on!commit your way to jehovah and he will act in your behalf. psalms 37:5

lol I'm going back to take a look at the connections of doors. thanks for the tip. in relation to remote start, it will be possible to run or is not easy. thanks for your help

I'm installing the alarm with an electrician, but he never installed an equal and we have some doubts. but regarding the alarm saying that the doors are open, a problem of poorly connected wires? I need a modem to open and close the doors? sorry all these questions but I wanted the alarm to function at 100%

You will have 2 ignition wires, treat them BOTH as ignition 1, do you have a transponder by-pass, there won't be one available from anywhere in North America because they refuse to import pieces of junk like Peugeots. There Darren you knew I was going to say something. P.S. Individual door and hatch contacts may be found on the BSI box they need to be dioded together, tach at the injectors or management box in front of right hand wheel arch. Do not use the button on top dash for locks or hazards, it's all data. You need to pick up lock/unlock motor wires and the indicator wires in the BSI box, this won't turn off the dome light hence individual contacts to cure the problem. Please don't try to install this yourself, find a pro. What's the weather like in Portugal?

hello howie thanks for your help, I have this, Xpresskit TBXKEY DEI 556U Universal Transponder Bypass, was that the staff of xpresskit, which showed me. I think it should be indicated. then the problem of false alarm, it is so poorly connected wires. When closing the car with the alarm the light from the roof torn off alone. and she should not do that? mean that the wires are attached to the ceiling light and should not. when i close the car with the alarm, the lights of the Roof Should Be on. and not turn off by themselves. is as it should be? I have a direct wire information but the electrician says he is not quite right, you can take a look around and say this is right? here goes wire             color wire       polarity      item location left front door   301pin32           +              see note trunk / hatch    3190a pin32        +              see note note left front door trigger 40way white connector fixed to bsi unit drivers side trunk / hatch way light brown 40way light brown connector fixed to bsi unit drivers side so that should be linked? and the weather here is very sunny.