the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

locks only with viper160xv in 01 tacoma?


Post ReplyPost New Topic
< Prev Topic Next Topic >
spidy3 
Member - Posts: 6
Member spacespace
Joined: October 16, 2007
Location: New York, United States
Posted: February 02, 2011 at 12:10 PM / IP Logged  
Picking up a 2001 toyota tacoma, double cab v6. Doesnt have wireless for locks.
I have an uninstalled Viper 160xv, includes the 160xv box, xcrs 500m box, and 556u box.
I know its a remote start, alarm, and all that. I was just looking to hook up the wireless for the locks, dont need the security or remote start, actually I just dont want to mess around with that part of it. I was wondering if anyone knew what I do and dont need to hook up in order to just get the remote/locks function working and if all 3 boxes are needed.
thanks
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: February 02, 2011 at 7:15 PM / IP Logged  
You just need the control module the other boxes won't be necessary if you just want the locks. Does the vehicle currently have powered locks or are you adding actuators?
spidy3 
Member - Posts: 6
Member spacespace
Joined: October 16, 2007
Location: New York, United States
Posted: February 02, 2011 at 7:23 PM / IP Logged  
So just the 160xv box?
It does have power locks just didn't come factory with wireless so I can't just buy a remote and program it
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: February 02, 2011 at 7:32 PM / IP Logged  

There's no info on this site for that year tacoma, but it will be negative trigger im almost sure you'll have to test and find the two triger wires, here's what you would need

On the primary harness you are using the

Red - 12 constant

black- ground

white- parking lights (optional, but it would be better for you to connect this)

Green - Door trigger ( info in brackets above)

The small two pin harness with the green and blue wires for the lock and unlock trigger

You need the ribbon that connects the brain and the xcrs you'll be cutting the thin gauge yellow wire on the ribbon on one side and connecting to a true ignition source, the other side plugs into the brain,

you'll need to run the antenna and that should be it.

spidy3 
Member - Posts: 6
Member spacespace
Joined: October 16, 2007
Location: New York, United States
Posted: February 03, 2011 at 8:17 PM / IP Logged  
Ok I got the Red, Black, White, GREEN/ Blue twisted
Yellow wire... true ignition source would have 12v only when key is on correct?
Green wire... the manual says 'not used' (green wire from H1), what do I hook it up to for door trigger?
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: February 04, 2011 at 5:07 AM / IP Logged  
Yes that's the door trigger wire, and you have the ignition wire correct.
spidy3 
Member - Posts: 6
Member spacespace
Joined: October 16, 2007
Location: New York, United States
Posted: February 07, 2011 at 10:00 AM / IP Logged  
Ok, so I have searched and didnt come up with an actual answer...
What would be considered a door trigger?
Would it be the switch in the door jam that makes the dome light come on when a door is opened? Thats the only thing I can think of.
What is the main purpose to hook this wire up?
Would that cause it to not lock when the door is open?
Going to install saturday, just want to make sure I plan it all out so it goes as smooth as it can.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 07, 2011 at 11:53 AM / IP Logged  
Connect the green to the wire on the dome light that switches to neg when the door is opened and goes open circuit either when the door is shut or shut and locked.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 07, 2011 at 11:58 AM / IP Logged  
Lock is grey, unlock is purple, both neg of course, ignition RED / black at the ignition loom.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 07, 2011 at 11:59 AM / IP Logged  
Sorry, ignition is BLACK/ red.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer