problem viper 5904 toggle switch off

Home / the12volt's Install Bay / Car Security and Convenience / problem viper 5904 toggle switch off (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 22, 2013 at 6:35 AM / IP Logged

Hi I am Spanish and nobody here this type of alarm installed.

I installed the viper and everything works fine except the remote start.

There is no way to make it work always gives me the error of toggle switch off but it's all connected and the switch is ok, I've tried everything and not to do, always gives the same error.

regards

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 22, 2013 at 6:36 AM / IP Logged

had forgotten to say i have a 2007 honda civic type R fn2 6 speed manual transmission

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 22, 2013 at 8:11 AM / IP Logged

Cut off the switch, join the ends together and make sure the BLACK/ white at H2/2 is grounded through the parking brake.

Have you fitted a by-pass for the factory transponder immobiliser?

Yes you're right, in Europe there's hardly anyone outside of the UK, Russia, Bulgaria and Romania who can install them.

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 22, 2013 at 9:11 AM / IP Logged

Thanks for your answer, do not know what to do.

The H2 / 2 I take the chassis grounded.

After taking rpms does not detect an injector signal and I had to put the tachometer virtual.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 22, 2013 at 9:14 AM / IP Logged

You pair the airfare, an hour's work, job done.

By-pass?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 22, 2013 at 9:17 AM / IP Logged

Injectors, NOT yellow/black

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 23, 2013 at 6:39 AM / IP Logged

the cable was wearing was black / yellow, I have changed to yellow and does not recognize the signal from the tachometer, not what I do anymore.

I leave I leave connected or not connected?

when I give the boot always comes off toggle switch

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 23, 2013 at 1:01 PM / IP Logged

this is the problem, not recognize the signal from tach

http://www.youtube.com/watch?v=eooRYPbcacg

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 23, 2013 at 1:07 PM / IP Logged

But you said you tried virtual tach and it still wouldn't start.

For the third and last time have you installed an immobiliser by-pass?

Have you tried to start with the key in the ignition?

sonic_afb

Member - Posts: 16

Joined: June 22, 2013

Location: Spain

Posted: June 23, 2013 at 1:51 PM / IP Logged

yes, i have installed an immobiliser by-pass IB-H34 it connected to the cambus and a status output in the viper (the dark blue wire H2/9), and the car not start in any tach mode, i tried with the key in the ignition, without key, all doors open, all doors closed, with the alarm activated and deactivated and nothing..

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.