2005 Honda Odyssey, Door Trigger?

Hi, The alarm system -neg door trigger can connect to dome light? Instead doing individual door trigger? For Honda Odyssey 2005. Thanks

Are you doing an alarm only or alarm/remote starter? It is best to connect door pin trigger input to door pins at all times. On your Honda, you'll have to use 4 wires (FL, FR, RL, RR) isolating with diodes. If you're doing an alarm only, you can use the domelight connection but it can result in false alarm triggers. DiodesSylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

I'm doing remote start and alarm... I have hard time to find all trigger on the fuse box.

Notes The individual door trigger wires are at the rear of the driver fuse/relay box in the driver kick. The LF door is green in a 16 pin plug, pin 15. The RF door is lt. GREEN/ red in a 14 pin plug, pin 12. The LR door is GREEN/ YELLOW in a 16 pin plug, pin 14. The RR door is GREEN / WHITE in a 14 pin plug, pin 13. Use all four wires and diode isolate each.Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

I don't know what bypass module you're using but you can use the DBALL2 from Directed, you won't have to wire door pins since they'll be supplied by the CAN bus network thru the module.Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

Detailed Function List W2W DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Sliding Door Control Driver DL-Sliding Door Control Passenger DL-Trunk / Hatch Release PK-Immobilizer Bypass-Data No Key Req'd RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin ST-Brake Status (foot brake) ST-E-Brake Status D2D DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Sliding Door Control Driver DL-Sliding Door Control Passenger DL-Trunk / Hatch Release FOB-Control of aftermarket alarm with OEM remote PK-Immobilizer Bypass-Data No Key Req'd RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin ST-Brake Status (foot brake) ST-E-Brake Status Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

Thanks for help and info. I tried to find all doors trigger on fuse Box but no luck. I check the black loom in the driver side panel, I found all doors trigger . Now I need to find and run extra wire for the trunk/hatch pin trigger. I had the dball and avital installed and now I installed Cardot alarm remote start, push to start and pke. I used DEI universal interface bypass.