Command Start CS2400

Hello,

I have a Command Start CS2400 and transmitter CS-306. The problem I have is that when I press any button nothing happens. I do hear nose coming from the transmitter. How do I program the transmitter. I do have another one that works fine so I know the unit is find.

THanks

Clinton

Thanks for the reply; Unfortually I still can't get it working. What happens is I press down the switch and the lights come on for 5 seconds and then goes off. I can't get the lights to come on soild. I do press the switch and then tap it quick but nothing. Any other suggestions

Thanks

Clinton

Keep trying, it's tricky. as soon as you release the switch, tap it all the way down and back really quick.

it'll work, trust me.

THanks,

Yes your correct, it's tricky and I finally got it.

Thanks again

Clinton

Hello,

My command start failed and now flashes 9 times. I have seen that you just disconnect the battery terminal and this will clear the code.

This can't be the only way of clearing the code. Does anyone know if there is a way using the engine switch and the remote control. I have seen this done before but can't remember.

Thanks

Clinton