’99 intrepid alarm/remote start

does anyone know the color and location of the tach wire on a 99' intrepid

thanks

if the vec is a 3.5 coil on plug. you can used the following wire on the coil

cyl #2 tn/pk  or cyl#4 tn/lg  or cyl#6 tn/lb

wassup guys, i have a 99' dodge intrepid that had a viper alarm on it, i changed it out and put a carbine 2 way fm pager with remote start in it (nice alarm 5 channels), but anyway i changed it out wire for wire testing them as i went, i had to find the remote start wires myself, and proud to say that i did it(no applause please lol)everything works fine except the door locks. they were working with the viper though. ok now i know in the intrepid there's one wire for lock and unlock and you need resistor for it ok cool got that. now on the viper alarm there were two wires green and blue one for lock one for unlock, now on the carbine there are three, (grenn and blue, lock/unlock and red 12v to relays) i hook up the green and blue wires, and i hooked up the red wire, now i'm so happy that i got the remote start right, didn't realize that my locks are negative and i didn't need the relays. now i can't figure out why they don't work from the alarm, they work fine from the switch. by hooking up the 12 v wire could i have burned out the resistors? are did i do something to the brain of the alarm? also, how can i check the lock and unlock output of the alarm with a dmm? and if the output is burned is there a way that i can run mylock/unlock wires to something else, for instance lock wire to starter kill out put? please help

thanks