the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Another enclosure, pics inside


Post ReplyPost New Topic
< Prev Topic Next Topic >
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: October 09, 2004 at 8:04 PM / IP Logged  

Here we go again, here's my 4th enclosure.  In pic 5 you will notice I cut out a section in the rear to apply my mixture of resin/cabosil expander to stiffen up the box from the inside.  The is for my hoopty/beater rear drivers' side corner.   Questions/comments are welcomed!     Another enclosure, pics inside -- posted image.

Pic 1 - Mold inside car

Pic 2 - Mold shape w/cut edges
Pic 3 - Mold with mdf ring
Pic 4 - Mold wrapped in fleece
Pic 5 -  Box with rear cut out
Pic 6 -  Box sealed with sub before bondo
Pic 7 -  Box with bondo/rage gold applied
Pic 8 -  Box painted silver
Pic 9 - Completed sub box loaded with subwoofer

Im a fiberglass whore!!
jortiz 
Member - Posts: 14
Member spacespace
Joined: May 04, 2004
Location: United States
Posted: October 10, 2004 at 12:50 AM / IP Logged  
Thats a pretty sweet box for a hoopty. What is this mixture of resin/cabosil expander?
93accordSE 
Copper - Posts: 203
Copper spacespace
Joined: February 19, 2004
Location: United States
Posted: October 10, 2004 at 1:00 AM / IP Logged  
Looks like theres some divets in it, or is it just a reflection?
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: October 11, 2004 at 10:43 AM / IP Logged  

jortiz wrote:
Thats a pretty sweet box for a hoopty. What is this mixture of resin/cabosil expander?

If you go do a search on some previous posts, search for "cabosil" or even "aerosil".  Its a powder that you mix with resin & hardener.  This makes the resin into a gel like substance that you can use to reinforce enclosures with.  In order words, you can use this to stiffen up an enclosure from the inside rather than adding layers of fiberglass.  You want to at least get about 1/4 inch thick of the mixture to stiffen up the enclosure walls.

Im a fiberglass whore!!
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: October 11, 2004 at 10:46 AM / IP Logged  

93accordSE wrote:
Looks like theres some divets in it, or is it just a reflection?

I think there was 1 or 2 little spots that weren't perfect, they could have been sanded more.  But I didnt want to spend too much time on this one being it was for my hoopty.

Im a fiberglass whore!!
jrjlo 
Member - Posts: 3
Member spacespace
Joined: October 06, 2004
Location: Virginia, United States
Posted: October 11, 2004 at 8:06 PM / IP Logged  
nice
kickerstang 
Copper - Posts: 180
Copper spacespace
Joined: April 08, 2004
Location: United States
Posted: October 12, 2004 at 11:43 AM / IP Logged  

looks like sh*t, try sanding it next time, that helps with the divets

what!?!?! you want some??
CarAudioHelp 
Copper - Posts: 198
Copper spacespace
Joined: July 18, 2003
Location: United States
Posted: October 12, 2004 at 1:40 PM / IP Logged  
Not too shabby. More body filler or a final layer of high build primer will take care of the pock marks. In the future you probably don't have to cut out the back of your enclosure to stiffen it. You can usually reach in through the woofer opening and do it that way or just pour the mixture in and then rotate the enclosure until you get the coverage you want. It beats having to cut and then repair the cut out.
Aerosil/Cabosil are fumed silica thixotropic powders. Fumed silica is a white powder that is very lightweight and is used as a resin thickening agent. It's sometimes referred to as "resin thick" for this reason. Aerosil and Cabosil are trade names and fumed silica is the generic name. Cabosil is manufactured by Cabot and Aerosil is manufactured by Degussa. And that concludes our lesson on fumed silica.
heavilymedicate 
Silver - Posts: 328
Silver spacespace
Joined: August 05, 2004
Location: Texas, United States
Posted: October 12, 2004 at 2:28 PM / IP Logged  
Looks ok, keep working at it and you'll only get better  :  )
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: October 13, 2004 at 5:35 PM / IP Logged  
Right now Im workin on some speaker door pods for my 6 1/2's.  This time, no short cuts, and 100% effort on sanding etc.  So far it's comin out pretty good, Im doin one at a time though.
Im a fiberglass whore!!
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer