the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

door locks and tachless


Post ReplyPost New Topic
< Prev Topic Next Topic >
Thack79 
Silver - Posts: 526
Silver spacespace
Joined: December 02, 2003
Location: Virginia, United States
Posted: January 20, 2008 at 7:24 PM / IP Logged  

trying to hook up my doors for a mazda 2004 rx8 and have a couple questions

1. I hooked up my door looks as instructed. Have negative pules (1k resistor for lock) when i hit my button on my remote the horn honks 1s for lock and twice for unlock however the never actually lock or unlock the door.

2. I want to run tachless however i am unsure how to do this. (rather run a tach wire if someone knows where exactly this wire is.

2004 Mazda rx8 and Python 100xp.

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 20, 2008 at 8:42 PM / IP Logged  

Try using a relay for the locks.

Will the python do tachless?

GregK 
Copper - Posts: 74
Copper spacespace
Joined: December 30, 2003
Location: Manitoba, Canada
Posted: January 20, 2008 at 8:58 PM / IP Logged  
Are you sure you have the correct LIGHT GREEN wire in the drivers kick panel?
For the tach, use any wire at the coil packs other than BLACK/ WHITE, BLACK or WHITE/ BLUE.
GDK Electronics
Home theatre & mobile electronics installations
Winnipeg, MB
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 20, 2008 at 10:15 PM / IP Logged  
mazda 2004 rx8 use relays to power the door lock and unlock.
Thack79 
Silver - Posts: 526
Silver spacespace
Joined: December 02, 2003
Location: Virginia, United States
Posted: January 21, 2008 at 8:20 AM / IP Logged  

im almost positive i have the right wire because if i ground that wire the doors unlock. but when i hook up the relays, it does the horn hooking thing.

Yes that alarm has tachless.

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 21, 2008 at 9:00 AM / IP Logged  

Your horn honks....and you don't have any connection to your horn?door locks and tachless -- posted image.  Where did you get the lock wire?

Testing by grounding a wire is not really the way to do it.  Get a DMM and turn the key in the door.

StealthEs 
Copper - Posts: 326
Copper spacespace
Joined: September 04, 2003
Location: New Jersey, United States
Posted: January 21, 2008 at 12:31 PM / IP Logged  

How do you have your relays wired up?

Power Locklt. green-driver kick, door harness
Lock is negative trigger thru a 1,000 ohm resistor. Unlock is a straight negative trigger. MUST use relays. Also found at the keyless control module above the passenger side kick panel.
Power Unlocksame as power lock wire

Cris
Thack79 
Silver - Posts: 526
Silver spacespace
Joined: December 02, 2003
Location: Virginia, United States
Posted: January 21, 2008 at 1:30 PM / IP Logged  
i have the light green wire in the drivers side panel. The horn is hooked up, parking lights, remote start, LED, antenna, etc. all but the tach and door locks. hit lock it honks the horn once and unlock honks twice but no doors. have a resistor on the lock wire as stated by StealthES.  no clue????
StealthEs 
Copper - Posts: 326
Copper spacespace
Joined: September 04, 2003
Location: New Jersey, United States
Posted: January 21, 2008 at 1:44 PM / IP Logged  
Are you wiring the lock unlock wire from the remote start directly into the lt.green wire? You Have to use 2 relays., If you have 2 relays who do you have them wired up?
Cris
Thack79 
Silver - Posts: 526
Silver spacespace
Joined: December 02, 2003
Location: Virginia, United States
Posted: January 21, 2008 at 6:44 PM / IP Logged  

using the 451m

purple is gounded

brown and white or cut (UNUSED)

BLUE - to light green wire unlock

other wire believe its green has a resister to it and is spliced into the BLUE wire.  lock

plugged into alarm brain of 1400 xp python

negative locks

thanks

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer