the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 lexus es 350 door locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
northern 
Copper - Posts: 154
Copper spacespace
Joined: November 04, 2005
Location: United States
Posted: December 04, 2008 at 8:31 PM / IP Logged  
Did a 2008 lexus ES 350 today with the push button start. I can't find the door lock wires on the vehicle. I spent a few hours looking for them. I went into the door switch, there are only 6 wires there and none of them test the way they should.
Astrostart and autostart wiring diagram say purple and Brown for lock/unlock (in the kick or BECM). The description that they give is also not right(26pin connect...ect..) Anyone have a better idea on this vehicle? Ive done hundreds of autostarts but never so much of a problem finding the locks.
mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: December 04, 2008 at 10:28 PM / IP Logged  
My info says the same as yours. Did you find a violet or brown wire at all? If so, are you testing the wires with the key in the door lock cylinder.
northern 
Copper - Posts: 154
Copper spacespace
Joined: November 04, 2005
Location: United States
Posted: December 05, 2008 at 8:28 AM / IP Logged  
This is a pushbutton vehicle. There is no Door lock(key) cylinder. There is a small hole below the handle but if you seperate the key from the smart key transmitter it does not go in that small hole.
northern 
Copper - Posts: 154
Copper spacespace
Joined: November 04, 2005
Location: United States
Posted: December 08, 2008 at 8:56 PM / IP Logged  
Anyone?
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: December 08, 2008 at 11:39 PM / IP Logged  
After you get the door panel off, at the back edge of the door there's like maybe a 6-pin plug, with the wires running toward the front of the door......the lock/unlock wires are in there for sure.
To test them, you have to remove the decorative key-cylinder cover from the outside of the door. You put the car's metal key into that slot, and then pry the cover off, and then it's a key cylinder there like any regular car.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer